首页 | 本学科首页   官方微博 | 高级检索  
     

利用锰矿酸浸废渣制备免烧砖的研究
引用本文:袁明亮,刘维荣,赖颖明,明宪权,黎贵亮,陈南雄.利用锰矿酸浸废渣制备免烧砖的研究[J].粉煤灰综合利用,2013(6):42-45.
作者姓名:袁明亮  刘维荣  赖颖明  明宪权  黎贵亮  陈南雄
作者单位:[1]中南大学资源加工与生物工程学院,长沙410083 [2]中信大锰矿业有限责任公司,南宁410006
基金项目:基金项目:广西千亿元产业重大科技攻关项目,桂科攻12118022-3
摘    要:以酸浸锰渣、石灰和水泥为主要原料,用河砂作为骨料,采用压力成型的方法制备锰渣免蒸免烧砖的研究。采用单因子试验法确定了最佳的成型压力,并对影响强度的胶砂比进行了分析。采用正交试验法研究了原料的最佳配合比。通过测试免烧砖的抗压强度和利用扫描电镜、x射线衍射分析(XRD)研究了免烧砖性能与强度形成机理。最佳成型压力为25MPa,原料配比为:酸浸锰渣35%、河砂45%、水泥13%、生石灰7%,水固比0.3。

关 键 词:酸浸锰渣  免烧砖  最佳配合比  抗压  正交法

Experimental Study on Preparation of Non-burnt Brick from Acid Leaching Manganese Residue
Abstract:The acid leaching manganese residue non-burnt is developed by using electrelytic manganese residue-lime-cement as the main material ,added with certain quantities of aggregates-river sand and moulded by press .Orthogonal experimental method is used to determine the op- timal ratio of material. The factors which are affecting the strength of product are analyzed , such as plastic sand ratio and molding pressure. By tes- ting the compressive strength of it, doing XRD and Scanning Electron Microscopy (SEM) , it showed the mechanism. The optimal molding pressure is 25 MPa , The optimum compositions of raw materials have been recommended as the following : electrolytic manganese 35%, sand45%, lime7%, cement13% ,water-solid ratio0.14.
Keywords:acid leaching manganese residue  non-burnt brick  the best mixture ratio  resist compression  orthogonal test
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号