|
|||||
|
|
| 三维正交机织铜丝／玻璃纤维层间混杂复合材料的拉伸和弯曲性能研究 | |
| 引用本文： | 许福军,姚澜,张凤翔,张琳婕,邓惠文,邱夷平.三维正交机织铜丝／玻璃纤维层间混杂复合材料的拉伸和弯曲性能研究[J].纤维复合材料,2013,30(1):36-40. |
| 作者姓名： | 许福军 姚澜 张凤翔 张琳婕 邓惠文 邱夷平 |
| 作者单位： | 1. 东华大学纺织学院,上海201620;产业用纺织品教育部工程研究中心,东华大学,上海201620 2. 浙江恒帝隆包装有限公司,浙江嘉兴,314400 3. 东华大学纺织学院,上海,201620 |
| 基金项目： | 上海市自然青年基金(12ZR1440500);教育部博士点基金(20120075120016);中央高校基本科研业务费专项资金 |
| 摘 要： | 本文设计和制作了两种层间混杂结构的三维正交机织铜丝／玻璃纤维复合材料，分别为铜丝单面混杂和双面混杂复合材料。两种复合材料的拉伸性能和弯曲性能测试结果表明，单面铜丝／玻璃纤维混杂复合材料的归一化拉伸强度和模量分别为1214MPa和83GPa；高于双面铜丝／玻纤混杂复合材料44％和51％。单面铜丝／玻璃纤维混杂复合材料的归一化弯曲强度为964NPa，高于双面铜丝／玻纤复合材料27％。两者的弯曲模量比较接近，均为60GPa左右。由于铜丝的混杂效应，三维正交机织铜丝／玻璃纤维层间混杂复合材料的拉伸和弯曲性能与相同结构的玻璃纤维复合材料相比有一定的下降。 |
| 关 键 词： | 三维正交机织复合材料 混杂复合材料 玻璃纤维 铜丝纤维 拉伸性能 弯曲性能 |
Tensile and Bending Properties of Three Dimensional Orthogonal Woven Copper Wire/Glass Fiber Hybrid Composites |
|
| XU Fujun , YAO Lan , ZHANG Fengxiang , ZHANG Linjie , DENG Huiwen , QIU Yiping.Tensile and Bending Properties of Three Dimensional Orthogonal Woven Copper Wire/Glass Fiber Hybrid Composites[J].Fiber Composites,2013,30(1):36-40. | |
| Authors: | XU Fujun YAO Lan ZHANG Fengxiang ZHANG Linjie DENG Huiwen QIU Yiping |
| Affiliation: | 1,2(1.College of Textiles,Donghua University,Shanghai,China 201620)(2.Engineering Research Center of Technical Textiles,Ministry of Education,Donghua University,Shanghai 201620)(3.Hengdilong Packing Co.,Ltd.Jiaxing,Zhejiang,China 314400) |
| Abstract: | Two types of 3D orthogonal woven copper wire/glass fiber hybrid composites with inter ply hybridization were designed and fabricated in this paper. There are copper wire/glass fiber hybrid composites with the copper wire in its single faces （CW-SF） and the composites with the copper wire in double faces （CW-DF）. The tensile and bending tests re- suits of these composites showed that the normalized tensile strength and modulus of CW-SF hybrid composites were 1 214 MPa and 83 GPa, which 44% and 51% higher than those of the CW-DF hybrid composites. The normalized bending strength of CW-SF hybrid composites were 964 MPa,which 27% higher than that of the CW-DF hybrid composites. The nor- malized bending modulus properties of both composites were about 60 GPa. Due to the influence of hybrid effects, the tensile and bending properties of the 3D orthogonal woven copper wire/glass fiber hybrid composites were lower than those of the 3D orthogonal woven glass composites with the same structure |
| Keywords: | three-dimensional orthogonal woven fabric hybrid composites glass fiber copper wire tensile properties bending properties |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |