| 两种咪唑型离子液体对纤维素的溶解及纺丝性能的比较 |
| |
| 引用本文： | 郭清华,蔡涛,张慧慧,邵惠丽,胡学超.两种咪唑型离子液体对纤维素的溶解及纺丝性能的比较[J].合成纤维,2009,38(4):20-25. |
| |
| 作者姓名： | 郭清华 蔡涛 张慧慧 邵惠丽 胡学超 |
| |
| 作者单位： | 东华大学材料学院,纤维材料改性国家重点实验室,上海,201620 |
| |
| 基金项目： | 国家自然科学基金，高等学校学科创新引智计划项目 |
| |
| 摘 要： | 以1-乙基-3-甲基咪唑醋酸盐（EMIM]Ac）和1-丁基-3-甲基咪唑氯盐（BMIM]CI）两种咪唑型离子液体为溶剂，研究比较了它们对纤维素的溶解性能及其溶液的纺丝加工性能。结果发现：两种离子液体均能在一定条件下溶解纤维素，但EMIM]Ac较BMIM]Cl对纤维素具有更低的溶解温度和更快的溶解速率。从流变分析还发现：纤维素/EMIM]Ac溶液与纤维素/BMIMCl溶液均为切力变稀流体，相同条件下纤维素/EMIM]Ac溶液的黏度远低于纤维素/BMIM]Cl溶液，使其可在相对低的温度下纺丝。此外，GPC分析结果表明：纤维素在用EMIM]Ac溶解及纺丝过程中降解程度较小，而用BMIM]Cl进行溶解纺丝时，降解作用则较明显。对纤维结构与力学性能的分析结果进一步表明：与相同喷头拉伸比下制得的EMIM]Ac法再生纤维素纤维相比，BMIM]Cl法再生纤维素纤维的聚集态结构相对较完善，结晶度与取向度更高些，从而使其力学性能也相对较好。
|
| 关 键 词： | 纤维素 离子液体 溶解 纤维 |
Comparision of Dissolution and Spinning Performances of Cellulose Using Two Kinds of Imidazole-based Ionic Liquids as the Solvents |
| |
| GUO Qing-hu,CAI Tao,ZHANG Hui-hui,SHAO Hui-li,HU Xue-chao.Comparision of Dissolution and Spinning Performances of Cellulose Using Two Kinds of Imidazole-based Ionic Liquids as the Solvents[J].Synthetic Fiber in China,2009,38(4):20-25. |
| |
| Authors: | GUO Qing-hu CAI Tao ZHANG Hui-hui SHAO Hui-li HU Xue-chao |
| |
| Affiliation: | State Key Laboratory for Modification of Chemical Fibers and Polymer Materials;College of Material Science and Engineering;Donghua University;Shanghai 201620;China |
| |
| Abstract: | Two kinds of imidazole-based ionic liquids,1-ethyl-3-methylimidazolium acetate(EMIM]Ac) and 1-butyl-3-methylimidazolium chloride(BMIM]Cl) were used as the solvents of cellulose.The dissolution of cellulose in these two ionic liquids and the rheological behavior and spinning performance of the resultant dopes were investigated.It was found that cellulose had lower dissolution temperature and faster dissolution rate in EMIM]Ac than in BMIM]Cl.Both of cellulose/EMIM]Ac and cellulose/BMIM]Cl solutions wer... |
| |
| Keywords: | cellulose ionic liquid dissolution fiber |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《合成纤维》浏览原始摘要信息 |
|
点击此处可从《合成纤维》下载全文 |
