| 3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用 |
| |
| 引用本文： | 赵翔,赵玉娜,宋美芹,张宝亮,高同舜,邱云学.3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用[J].橡胶科技,2020,18(1):0034-0036. |
| |
| 作者姓名： | 赵翔 赵玉娜 宋美芹 张宝亮 高同舜 邱云学 |
| |
| 作者单位： | 青岛双星轮胎工业有限公司,青岛双星轮胎工业有限公司,青岛双星轮胎工业有限公司,青岛双星轮胎工业有限公司,青岛双星轮胎工业有限公司,青岛双星轮胎工业有限公司 |
| |
| 摘 要： | 研究3+9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用。结果表明,采用1层压延密度为83根·dm-1的3+9×0.175NT钢丝帘布替代3层压延密度为110根·dm^-1的1670dtex/2-28EPI聚酯帘布用于6.50R1610PR轻型载重子午线轮胎胎体,压延工艺良好,成型和硫化过程正常。成品轮胎质量减小,成本降低,充气外缘尺寸、强度性能、耐久性能和高速性能均符合国家标准或企业标准要求。
|
| 关 键 词： | 轻型载重子午线轮胎 胎体 钢丝帘线 聚酯帘线 轻量化 成本 |
| 收稿时间： | 2019/8/29 0:00:00 |
| 修稿时间： | 2019/8/29 0:00:00 |
Application of 3+9×0. 175NT Steel Cord in Carcass of Light Truck Radial Tire |
| |
| Authors: | zhao xiang zhao yun song meiqin zhang baoliang gao tongshun and qiu yunxue |
| |
| Affiliation: | Qingdao Doublestar Tire Industrial Co, Ltd,Qingdao Doublestar Tire Industry Co. Ltd,Qingdao Doublestar Tire Industry Co. Ltd,Qingdao Doublestar Tire Industry Co. Ltd,Qingdao Doublestar Tire Industry Co. Ltd,Qingdao Doublestar Tire Industry Co. Ltd |
| |
| Abstract: | The application of 3+9×0.175NT steel cord in the carcass of light truck radial tire was studied.The results showed that,by using one layer of 3+9×0.175NT steel cord with the calendering density of 83 pieces per decimeter to replace three layers of 1670dtex/2-28EPI polyester cord with the calendering density of 110 pieces per decimeter in the carcass of 6.50R1610PR light truck radial tire,the calendering process was good,the forming and curing process were normal,the weight and cost of finished tire were reduced,and the inflated peripheral dimension,strength,endurance and high speed performance met the requirements of national standards or enterprise standards. |
| |
| Keywords: | light truck radial tire carcass steel cord polyester cord light weight cost |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《橡胶科技》浏览原始摘要信息 |
|
点击此处可从《橡胶科技》下载全文 |
|
