首页 | 本学科首页   官方微博 | 高级检索  
     

水性环氧乳液的研制及性能研究
引用本文:陈俊芳,李素芳,从洪云,黄娟萍,李娇.水性环氧乳液的研制及性能研究[J].涂料工业,2011,41(8):46-49.
作者姓名:陈俊芳  李素芳  从洪云  黄娟萍  李娇
作者单位:湖南大学化学化工学院,长沙,410082
摘    要:采用环氧树脂E-44与不同相对分子质量的聚乙二醇(PEG)反应合成了高分子非离子型水性环氧树脂乳化剂,并使用相反转法制备了水性环氧树脂乳液,考查了PEG相对分子质量、乳化剂结构及其用量对环氧树脂乳液的离心、冻融、稀释稳定性及涂膜性能的影响。结果表明:采用聚乙二醇相对分子质量为6 000,n(羟基)∶n(环氧基)=1∶1.25,以叔胺为催化剂,于130~134℃反应合成的乳化剂具有较好的乳化效果;乳化剂用量在12%时,制得的涂膜综合性能最佳。

关 键 词:非离子乳化剂  相反转  乳液稳定性  水性环氧乳液  涂膜性能

Study on Properties and Preparation of Waterborne Epoxy Resin Emulsion
Chen Junfang,Li Sufang,Cong Hongyun,Huang Juanping,Li Jiao.Study on Properties and Preparation of Waterborne Epoxy Resin Emulsion[J].Paint & Coatings Industry,2011,41(8):46-49.
Authors:Chen Junfang  Li Sufang  Cong Hongyun  Huang Juanping  Li Jiao
Affiliation:Chen Junfang,Li Sufang,Cong Hongyun,Huang Juanping,Li Jiao (School of Chemistry and Chemical Engineering,Hunan University,Changsha 410082,China)
Abstract:Polymeric nonionic emulsifiers were prepared by polyethylene glycol(PEG) and epoxy resin E-44,which was then used to prepare the epoxy resin emulsion by phase inversion process.The effect of molecular weight of PEG,amount and structure of emulsifiers on emulsion stability and film properties were discussed.The results showed that the emulsifier synthesized by use of PEG6000 and E-44(1∶1.25 mole ratio) at(132±2) ℃ provided good emulsifying properties and coatings film with good comprehensive properties as incorporated with the dosage of 12%wt tertiary amines as catalyst.
Keywords:nonionic emulsifier  phase inversion technique  emulsion stability  waterborne epoxy resin emulsion  film properties  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号