Preparations and characterizations of Ca doped Ni–Mg–Mn nanocrystalline ferrites for switching field high-frequency applications

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni_0·5Mg_0·3Mn_0.2Ca_xFe_2-xO₄ (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice parameter, ‘da’, ‘db’, ‘dc’, and ‘dv’ were evaluated using unit cell software. The absorption peaks at 427 to 538 cm^?1 confirmed the spinel structure, which was evaluated using FTIR. FESEM analyses showed that the agglomerations increased with the doping of Ca in Ni–Mg–Mn ferrites. Remanence, Y–K angles, saturation, coercive force, magnetic squareness, magnetic moment, and anisotropy constant were determined for Ca-doped Ni–Mg–Mn spinel ferrite samples. It is noticed that saturation increases from 29.157 to 51.322 emu/g, whereas remanence increased from 5.34 to 9.40 emu/g, respectively. The permeability, anisotropy constant, and magnetic moments were also found to increase with Ca doping. However, the Y–K angles increased with Ca concentration in Ni–Mg–Mn nano ferrites. In addition, the switching field distribution (SFD) and high-frequency response of all the Ca-doped Ni–Mg–Mn samples were also evaluated. Ca-doped Ni–Mg–Mn samples are suggested to be suitable for switching, filters, inductors, and microwave absorption applications because of the superparamagnetic nature of the prepared spinel ferrites.