首页 | 本学科首页   官方微博 | 高级检索  
     

连铸机含油污水处理新工艺及其应用
引用本文:葛平,李增强.连铸机含油污水处理新工艺及其应用[J].工业水处理,2006,26(6):90-92.
作者姓名:葛平  李增强
作者单位:济南济钢设计院,山东,济南,250101
摘    要:传统的连铸机含油污水处理工艺存在除油和悬浮物不彻底,压力过滤器石英砂滤料易板结堵塞、乱层,水系统大量滋生生物黏泥等问题.提出了磁化-高效斜浅层除油沉淀-管道自动过滤新工艺,并进行了工业性试验研究.试验结果表明,出水悬浮物<20 mg/L、油<5 mg/L.该工艺用于连铸含油污水的处理效果良好,具有广阔的推广应用前景.

关 键 词:磁化  斜浅层除油沉淀  含油污水  连铸
文章编号:1005-829X(2006)06-0090-03
收稿时间:2006-03-17
修稿时间:2006年3月17日

New process of the treatment of oil-bearing wastewater in continuous casting system and its application
Ge Ping,Li Zengqiang.New process of the treatment of oil-bearing wastewater in continuous casting system and its application[J].Industrial Water Treatment,2006,26(6):90-92.
Authors:Ge Ping  Li Zengqiang
Abstract:According to the traditional processes of the treatment of oil-bearing wastewater in continuous casting system, it was found that the removal of oil and suspended matter could not be carried out, the pressure-filter quartz sand filtrated materials were easy to get agglomerated and plugged, caused layer disorder, and produced a lot of biological slime in the water system. A new process of magnetization-lamella separating oil skimming-pipe automatic filter is introduced, on the basis of industrial experiments. The results show that the suspended matter in effluent is lower than 20 mg/L and oil is lower than 5 mg/L. It is particularly effective for treating oil-bearing wastewater in casting system and has a promising future.
Keywords:negnetization  lamella separating oil skimming  oil-bearing wastewater  continuous casting
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号