| 制备工艺对La改性的Ca3Co4O9基陶瓷热电性能的影响 |
| |
| 引用本文： | 林元华,周西松,南军,刘宇恒,南策文.制备工艺对La改性的Ca3Co4O9基陶瓷热电性能的影响[J].硅酸盐学报,2004,32(5):537-541. |
| |
| 作者姓名： | 林元华 周西松 南军 刘宇恒 南策文 |
| |
| 作者单位： | 清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084;清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084;清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084;清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084;清华大学材料科学与工程系,新型陶瓷与精细工艺国家重点实验室,北京,100084 |
| |
| 基金项目： | 国家高技术研究发展863计划(02AA30240601),国家自然科学基金(50072010;59825102)资助项目. |
| |
| 摘 要： | 利用常压烧结、冷等静压成型后常压烧结及热等静压烧结3种不同制备工艺，合成了(Ca0.9La0.1)3Co4O9热电材料。XRD分析表明：不同工艺制备的样品均为Ca3Co4O9相。样品的SEM照片显示：晶粒为片状结构；热等静压烧结制备的样品，其片状结构不明显，但致密度较之另外两种工艺大幅度提高，其相对密度为95％。制备工艺对(Ca0.9La0.1)3Co4O9热电材料Seebeck系数影响不大，但热压烧结样品能大幅度提高(Ca0.9La0.1)3Co4O9电导率。在一定温度范围内，随温度升高，功率因子大幅度增加，对于热压烧结的样品尤为显著。
|
| 关 键 词： | 钴酸钙陶瓷 热电性能 电导率 热压烧结 |
| 文章编号： | 0454-5648(2004)05-0537-05 |
| 修稿时间： | 2003年7月24日 |
INFLUENCE OF SYNTHESIS TECHNIQUES ON THERMOELECTRIC PROPERTIES OF La-MODIFIED Ca3Co4O9-BASED CERAMICS |
| |
| LIN Yuanhua,ZHOU Xisong,NAN Jun,LIU Yuhen,NAN Cewentment of Materials Science and Engineering,Tsinghua University,Beijing,China.INFLUENCE OF SYNTHESIS TECHNIQUES ON THERMOELECTRIC PROPERTIES OF La-MODIFIED Ca3Co4O9-BASED CERAMICS[J].Journal of The Chinese Ceramic Society,2004,32(5):537-541. |
| |
| Authors: | LIN Yuanhua ZHOU Xisong NAN Jun LIU Yuhen NAN Cewentment of Materials Science and Engineering Tsinghua University Beijing China |
| |
| Affiliation: | LIN Yuanhua,ZHOU Xisong,NAN Jun,LIU Yuhen,NAN Cewentment of Materials Science and Engineering,Tsinghua University,Beijing100084,China) |
| |
| Abstract: | (Ca0.9La0.1)3Co4O9 thermoelectric materials were prepared by ordinary pressing sintering (OP), ordinary pressing sintering after cold isostatic pressed forming(COP) and hot isostatic pressing sintering (HP) three kinds of synthesis techniques. The XRD results indicate that all samples prepared by different techniques are single Ca3Co4O9 phase. The grains for the OP and COP samples are in lamellar structure observed by the SEM. The lamellar structure is not distinct for samples sintered by hotisostatic pressing sintering, but for those samples, the relative density can be improved greatly and reached to about 95%. The synthesis techniques have little influence on the samples' Seebeck coefficient but great effect on the electric conductivity of samples prepared by hot-pressing sintering. The power factor will increase with increasing of the temperature, especially for the samples by the hot-pressing sintering technique. |
| |
| Keywords: | calcium cobaltite ceramics thermoelectric property electric conductivity hot-pressing sintering |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
