| 低温超声波化学镀镍工艺研究 |
| |
| 引用本文： | 李慧琪,刘俊波.低温超声波化学镀镍工艺研究[J].电镀与涂饰,1998,17(3):1-4,21. |
| |
| 作者姓名： | 李慧琪 刘俊波 |
| |
| 作者单位： | 山东矿业学院材料工程研究所!271019 |
| |
| 基金项目： | 国家自然科学基金!59571049120 |
| |
| 摘 要： | 为降低常规化学镀的施镀温度，采用低温超声波化学镀镍工艺，研究了镀液成分，工艺条件的影响。与传统化学镀镍工艺相比，该工艺所得镀层含磷量高，硬度高，组织结构致密均匀。
|
| 关 键 词： | 化学镀 超声波 低温 镀镍电镀 工艺 |
Low Temperature Electroless Nickel Plating by Use of Ultrasonic Wave |
| |
| LI Huiqi,LIU Junbo.Low Temperature Electroless Nickel Plating by Use of Ultrasonic Wave[J].Electroplating & Finishing,1998,17(3):1-4,21. |
| |
| Authors: | LI Huiqi LIU Junbo |
| |
| Affiliation: | LI Huiqi;LIU Junbo |
| |
| Abstract: | The purpose of the study was to lower plating temperature of conventional nickel electroless plating process by use of ultrasonic wave. Effect of bath contents and plating parameters on plating rate was emphasized. Properties of the deposits such as morpology, microstructure, phosphorus content and bardness were studies. Compared with conventional electroless nickel plating process, the deposits obtained are greatly improved with higher phosphorus content, hardness, more compact and uniform microstructure. |
| |
| Keywords: | electroless nickel plating ultrasonic wave low temperature |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
