| 旋风分离器的选型计算 |
| |
| 引用本文： | 刘莹.旋风分离器的选型计算[J].当代化工,2018(2):415-417. |
| |
| 作者姓名： | 刘莹 |
| |
| 作者单位： | 中国石油集团东北炼化工程有限公司,辽宁 大连,116085 |
| |
| 摘 要： | 旋风分离器是指采用离心沉降的原理对气流中所含固体颗粒或液滴进行分离的设备,工业中一般采用标准旋风分离器的结构比例参数进行旋风分离器的设计,通过实际项目中选用的旋风分离器的具体数据,总结出进行旋风分离器选型计算所需要的参数、所采用的具体计算方法和步骤。
|
| 关 键 词： | 离心沉降 旋风分离器 入口气速 允许压降 阻力系数 Centrifugal settling Cyclone separator Inlet gas velocity Allowable pressure drop Drag coefficient |
Type Selection Calculation of Cyclone Separator |
| |
| LIU Ying.Type Selection Calculation of Cyclone Separator[J].Contemporary Chemical Industry,2018(2):415-417. |
| |
| Authors: | LIU Ying |
| |
| Abstract: | The cyclone separator is a equipment to separate solid particles or droplets in gas flow based on the principle of centrifugal sedimentation. The structure proportional parameters of standard cyclone separator are always used to design cyclone separator in industry. Based on the specific data of cyclone separators in actual project, the parameters, methods and steps of type selection calculation of cyclone separator were summarized. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
