| 己内酰胺聚合反应工程CAD软件包——Ⅰ.工业化生产实际值与软件包计算结果的比较 |
| |
| 引用本文： | 肖文华,刘重林,唐志廉,黄南薰.己内酰胺聚合反应工程CAD软件包——Ⅰ.工业化生产实际值与软件包计算结果的比较[J].合成纤维工业,2001,24(5):12-15. |
| |
| 作者姓名： | 肖文华 刘重林 唐志廉 黄南薰 |
| |
| 作者单位： | 1. 东华大学材料学院,上海,200051
2. 岳阳石油化工总厂化纤厂,湖南岳阳414014 |
| |
| 摘 要： | 介绍了己内酰胺聚合反应工程 CAD软件包的建立 ,用工厂单 VK管聚合和两步法聚合生产工艺验证了该软件包的可靠性。通过计算可得到单体转化率、聚合物聚合度、相对粘度、相对分子质量分布、环状二聚体含量、反应潜热等重要参数在聚合管中的变化情况
|
| 关 键 词： | 己内酰胺 动力学 聚合 CAD软件包 |
| 文章编号： | 1001-0041(2001)05-0012-04 |
| 修稿时间： | 2000年4月24日 |
CAD SOFTWARE FOR CPL POLYMERIZATION ENGINEERING I. COMPARISON BETWEEN CALCULATION RESULTS AND PRACTICAL RESULTS |
| |
| Xiao Wenhua ,Liu Chonglin ,Tang Zhilian ,Huang Nanxun.CAD SOFTWARE FOR CPL POLYMERIZATION ENGINEERING I. COMPARISON BETWEEN CALCULATION RESULTS AND PRACTICAL RESULTS[J].China Synthetic Fiber Industry,2001,24(5):12-15. |
| |
| Authors: | Xiao Wenhua Liu Chonglin Tang Zhilian Huang Nanxun |
| |
| Affiliation: | Xiao Wenhua 1,Liu Chonglin 2,Tang Zhilian 1,Huang Nanxun 1 |
| |
| Abstract: | A new CAD software for caprolactam polymerization was reported. Its reliability was verified by the results from plants with single VK tube polymerization or two step polymerization. From calculation, some important data, such as the conversion of monomer, degree of polymerization, relative viscosity, relative molecular mass distribution, cyclic dimer content and integral heat etc., can be adequately predicted at each point of the VK tube. |
| |
| Keywords: | caprolactam dynamics polymerization CAD software |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
