首页 | 本学科首页   官方微博 | 高级检索  
     

硫磺固化烯丙基环氧树脂的动力学研究
引用本文:张军营,李亭亭,张光普,程珏.硫磺固化烯丙基环氧树脂的动力学研究[J].化学与粘合,2014(3):155-158.
作者姓名:张军营  李亭亭  张光普  程珏
作者单位:北京化工大学 材料科学与工程学院,北京100029
基金项目:国家自然科学基金项目(编号:21176017)
摘    要:通过非等温和等温差式扫描量热法(DSC)对硫磺(S)固化2,2’-二烯丙基双酚A型环氧树脂(DADGEBA)的动力学进行了研究。从DSC曲线两个放热峰得知,DADGEBA/S体系是两步反应,通过等温DSC分析确定该体系在温度高于170℃低于210℃时满足Kamal自催化模型,通过非等温DSC确定该体系在温度高于210℃时,满足n级反应模型,得到了动力学模型的相关参数。DADGEAB/S体系在整个固化反应过程中满足两种动力学机理函数,这与DADGEBA/S体系双固化机理相符。

关 键 词:硫磺  烯丙基环氧树脂  动力学

Study on the Curing Kinetics of Diallyl Epoxy Resin Cured with Sulfur
ZHANG Jun-ying,LI Ting-ting,ZHANG Guang-pu,CHENG Jue.Study on the Curing Kinetics of Diallyl Epoxy Resin Cured with Sulfur[J].Chemistry and Adhesion,2014(3):155-158.
Authors:ZHANG Jun-ying  LI Ting-ting  ZHANG Guang-pu  CHENG Jue
Affiliation:(College of Material Sciences and Engineering, Beijing University of Chemical Technology, Beijing 10029, China)
Abstract:The curing kinetics of diglycidyl ether of 2,2’-diallyl bisphenol A (DADGEBA) cured with sulfur (S) was investigated by non-isothermal and isothermal differential scanning calorimetry (DSC). The double exothermic peaks in DSC curve showed that the curing process of DADGEBA/S system was a two-step reaction. The isothermal DSC analysis confirmed that the curing reaction followed Kamal ’s autocatalytic model when the reaction temperature was between 170℃ and 210℃, and when the temperature was higher than 210℃, the nth-order reaction model could be used to describe the curing reaction process of the DADGEBA/S system. The two kinetic equations in the entire reaction process of DADGEBA/S system were consistent with the two-step reaction mechanisms of the same system.
Keywords:Sulfur  diallyl epoxy resin  curing kinetics
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号