首页 | 本学科首页   官方微博 | 高级检索  
     

溴代芴的合成研究
引用本文:吕宏飞,张惠,李猛,单雯妍.溴代芴的合成研究[J].化学与粘合,2012(1):29-31.
作者姓名:吕宏飞  张惠  李猛  单雯妍
作者单位:[1]黑龙江省科学院石油化学研究院,黑龙江哈尔滨150040 [2]哈尔滨理工大学材料科学与工程学院,黑龙江哈尔滨150040
基金项目:哈尔滨市科技局攻关项目(编号:2007AA4CG068)
摘    要:以碳酸丙烯酯为溶剂、以N-溴代丁二酰亚胺(NBS)为溴化试剂,进行芴的溴代反应研究,合成了2-溴芴和2,7-二溴芴。通过对反应温度、NBS的用量以及加入方式等的考察,确定合成2-溴芴的最佳反应条件。最佳反应条件为:反应温度23℃、NBS和芴的物质的量比为1.1:1、NBS分批加入。先将芴和碳酸丙烯酯预热至60℃,使得芴全部溶解,然后降至反应温度,分批加入NBS。2-溴芴和2,7-二溴芴分别以无水乙醇和冰醋酸重结晶,目标产物的液相色谱纯度均可达到99%以上。

关 键 词:NBS  2-溴芴  2  7-二溴芴  溴化

Study on the Synthesis of Bromofluorene
LV Hong-fei,ZHANG Hui,LI Meng,SHAN Wen-yan.Study on the Synthesis of Bromofluorene[J].Chemistry and Adhesion,2012(1):29-31.
Authors:LV Hong-fei  ZHANG Hui  LI Meng  SHAN Wen-yan
Affiliation:1.Institute of Petrochemistry, Heilongjiang Academy of Scienees, Harbin 150040, China; 2.College of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China)
Abstract:The 2-bromofluorene and 2,7-dibromofluorene were synthesized with using propylene carbonate as solvent and N-bromosuccinimide (NBS) as bromination agent. The influence of reaction temperature, ratio of NBS to fluorene and the feeding mode was investigated. The optimal reaction conditions were obtained as follows: the reaction temperature was 23℃, the ratio of NS to fluorene was 1.1:1 and the stage addition was adopted. The fluorene and propylene carbonate was heated to 60℃, made the fluorene dissolve completely, and then made it drop to the reaction temperature, and fed the NBS through the stage addition. The 2-bromofluorene and 2,7-dibromofluorene were recrystallized from ethanol and acetic acid respectively, and the liquid chromatogram purity of objective products could reach over 99%.
Keywords:NBS  2-bromofluorene  2  7-dibromofluorene  bromination
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号