首页 | 本学科首页   官方微博 | 高级检索  
     

一步水热法制备钛酸锂材料
引用本文:闵越,王兴蔚,张勇,侯春平,龚波林.一步水热法制备钛酸锂材料[J].化工技术与开发,2014(10):17-19.
作者姓名:闵越  王兴蔚  张勇  侯春平  龚波林
作者单位:1. 宁夏共享新能源材料有限公司,宁夏银川,750021
2. 宁夏大学化学化工学院,宁夏银川,750021
摘    要:采用一步水热法制备钛酸锂材料,并对制备的钛酸锂的性能进行研究。该方法与传统的水热合成法相比,具有制备工艺周期缩短,无其它试剂使用,减少环境污染等优点。结果表明,该方法制备的钛酸锂材料,在0.1 C倍率下的首次放电比容量为163 mAh·g^-1,首次效率为100%;XRD分析表明,其晶型结构与标准的钛酸锂图谱一致;SEM表征显示其颗粒形貌规则、分布均匀;循环伏安法测试表明,其具有良好的充放电可逆性能。

关 键 词:钛酸锂  一步水热法  比容量  制备工艺

Preparation of Lithium Titanate Material by One Step Hydrothermal Method
MIN Yue,WANG Xing-wei,ZANG Yong,HOU Chun-ping,Gong Bo-lin.Preparation of Lithium Titanate Material by One Step Hydrothermal Method[J].Technology & Development of Chemical Industry,2014(10):17-19.
Authors:MIN Yue  WANG Xing-wei  ZANG Yong  HOU Chun-ping  Gong Bo-lin
Affiliation:MIN Yue;WANG Xing-wei;ZANG Yong;HOU Chun-ping;Gong Bo-lin;Ningxia Kocel New Energy Materials Co. Ltd.;School of Chemistry and Chemical Engineering,Ningxia University;
Abstract:Lithium titanate was synthesized by one step hydrothermal method and its performance was studied. The cycle preparation process was shortened and no other reagents were used by this method compared with the conventional hydrothermal synthesis method. Moreover, this method used much less raw materials and had less environmental pollution. The results showed that the prepared sample had a discharge specific capacity of 163mAh/g at 0.1C rate and the initial efficiency was nearly 100%.The XRD pattern of the sample was consistent with the standard card, and it had a regular and uniformly particles distribution. The lithium titanate had a good charge/discharge reversibility by cyclic voltammetry analysis.
Keywords:lithium titanate  one step hydrothermal method  specific capacity  preparation process
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号