| 混炼工艺对炭黑填充天然橡胶/反式1,4-聚异戊二烯并用胶性能的影响 |
| |
| 引用本文： | 王韵然,李冀川,刘莉.混炼工艺对炭黑填充天然橡胶/反式1,4-聚异戊二烯并用胶性能的影响[J].橡胶工业,2012,59(4):223-226. |
| |
| 作者姓名： | 王韵然 李冀川 刘莉 |
| |
| 作者单位： | 1. 青岛科技大学高性能聚合物及成型技术教育部工程研究中心,山东青岛,266042
2. 中国石油西南油气田公司安全环保与技术监督研究院,四川成都,610213 |
| |
| 摘 要： | 采用4种不同的混炼工艺制备炭黑填充天然橡胶(NR)/反式1,4-聚异戊二烯(TPI)并用胶,并对其性能进行对比研究。结果表明:采用在常温下加入炭黑和配合剂、高温下加入硫黄和促进剂的混炼工艺制备的NR/TPI并用胶加工安全性、综合物理性能和减震性能较好,动态生热较低。
|
| 关 键 词： | 混炼工艺 天然橡胶 反式1 4-聚异戊二烯 并用胶 动态力学性能 |
Influence of Mixing Process on Properties of Carbon Black Filled NR/TPI Blends |
| |
| WANG Yun-ran
,
LI Ji-chuan
,
LIU Li.Influence of Mixing Process on Properties of Carbon Black Filled NR/TPI Blends[J].China Rubber Industry,2012,59(4):223-226. |
| |
| Authors: | WANG Yun-ran LI Ji-chuan LIU Li |
| |
| Affiliation: | 1(1.Qingdao University of Science and Technology,Qingdao 266042,China;2.China Petro Southwestern Oil-Gas Field Co.,Ltd,Chengdu 610213,China) |
| |
| Abstract: | The carbon black filled NR/TPI blends were prepared by four different mixing processes,and their properties were investigated.The results showed that,the NR/TPI blend,which was prepared by adding carbon black and compounding agents at room temperature,and adding sulfur and accelerator at high temperature,possessed better processing safety,comprehensive physical property and damping performance,and had lower dynamic heat build-up. |
| |
| Keywords: | mixing process NR TPI blends dynamic property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
