首页 | 本学科首页   官方微博 | 高级检索  
     


Electrical properties of annealed MPCVD grown vertically aligned carbon nanotube films
Authors:BR Huang  CS Huang  CC Wu  L-CL Chen  KH Chen
Affiliation:aInstitute of Electronics and Information Engineering, National Yunlin University of Science and Technology, Taiwan, ROC;bCenter for Condensed Matter Sciences, National Taiwan University, Taipei, Taiwan, ROC;cInstitute of Atomic and Molecular Science, Academia Sinica, Taipei, Taiwan, ROC
Abstract:Vertically aligned multiwalled carbon nanotubes (MWNTs) were grown on silicon substrate at a low temperature (<520 °C) using microwave plasma-enhanced chemical vapor deposition (MPCVD). From the Raman spectra, it was found that the ID/IG ratio of MWNTs decreased after annealing, indicating that more graphenes were formed by the annealing process. Nevertheless, a strong Si signal was found in Raman spectra after annealing at a high-temperature (600 °C). From X-ray photoelectron spectroscopy (XPS) analysis it was observed that the ratio of the oxygen to carbon (O/C) signal intensity was from 0.15 to 1.88 for the increasing annealed temperatures of MWNTs, and a Si signal was found nearby the surface of MWNTs after annealing at 600 °C. Moreover, from the IV measurement, the less symmetric IV characteristic was found for the metal/MWNTs/metal (MIM) sandwich structure of unannealed MWNTs. After 300 °C annealing process, the positive current was increase and the negative current was decrease. It was conjectured that the MWNTs could obtain more graphenes structure by the 300 °C annealing process. Moreover, the IV trace of the sample annealed by 600 °C exhibited rapid current descent, indicating the oxygenated and partly silicided phenomena might cover outer graphite layer of MWNTs. The equivalent circuit for the MIM sandwich structure could be represented as two Schottky barrier diodes in a back-to-back configuration. From the data fitting, it was found that the Schottky barrier height (B0) decreased and the current density (J) increased from unannealing to 300 °C annealing temperature. However, the Schottky barrier height (B0) was increased from 300 to 600 °C annealing temperature. Comparison with the XPS, this may due to the oxygenated and partly silicided phenomenon on the surface of the MWNTs.
Keywords:Multiwalled carbon nanotubes  Annealing process  Electrical properties  XPS
本文献已被 ScienceDirect 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号