首页 | 本学科首页   官方微博 | 高级检索  
     

低噪声轮胎花纹结构参数优化方法
引用本文:陈理君,杨唐胜,杨立,李福军,刘雨青,杨光大.低噪声轮胎花纹结构参数优化方法[J].轮胎工业,2002,22(12):720-728.
作者姓名:陈理君  杨唐胜  杨立  李福军  刘雨青  杨光大
作者单位:1. 武汉理工大学,信息学院,湖北,武汉,430070
2. 北京橡胶工业研究设计院,北京,100039
3. 上海米其林回力轮胎股份有限公司,上海,200082
摘    要:在轮胎花纹低噪声优化原理及寻优方法研究基础上,重点论述了用模糊遗传算法(F-GA)对轮胎花纹的花纹块大小及比例、花纹槽大小及比例、节距排列、节距比例、错位及花纹条数八大参数进行优化的方法。通过寻优可得到多种低噪声轮胎花纹方案,再对其耐磨性、抓着力、美观程度等进行模糊综合评判,最终确定各项性能最佳的低噪声轮胎花纹方案。

关 键 词:低噪声轮胎  轮胎花纹  结构参数  优化方法  花纹噪声  模糊遗传算法  花纹参数
文章编号:1006-8171(2002)12-0720-09

Optimization for structure parameters of low noice tread patterns
CHEN Li-jun,YANG Tang-sheng,YANG Li,LI Fu-jun,LIU Yu-qing and YANG Guang-da.Optimization for structure parameters of low noice tread patterns[J].Tire Industry,2002,22(12):720-728.
Authors:CHEN Li-jun  YANG Tang-sheng  YANG Li  LI Fu-jun  LIU Yu-qing and YANG Guang-da
Affiliation:CHEN Li jun 1,YANG Tang sheng 1,YANG Li 1,LI Fu jun 2,LIU Yu qing 1,YANG Guang da 3
Abstract:Based on the study of the optimization mechanism for low noice tread patterns and the optimum seeking method,the optimization of eight important parameters,such as the block sizes and their ratio,the groove sizes and their ratio,the pitch arrangement and ratio,the disalignment and the rib number with the fuzzy genetic algorithm (F GA) are described in detail.Many low noice tread pattern designs can be obtained by optimum seeking and the final low noice tread patterns design with the best comprehensive properties is determined by the fuzzy comprehensive adjugment of the obtained designs in terms of wear resistance,traction and apperance.
Keywords:
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《轮胎工业》浏览原始摘要信息
点击此处可从《轮胎工业》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号