| 14.00-24 28PR矿山型加深花纹工程机械轮胎的设计 |
| |
| 引用本文： | 陈五七,文盛辉.14.00-24 28PR矿山型加深花纹工程机械轮胎的设计[J].轮胎工业,2009,29(7):404-406. |
| |
| 作者姓名： | 陈五七 文盛辉 |
| |
| 作者单位： | 杭州中策橡胶有限公司,新安江分厂,浙江,建德,311607 |
| |
| 摘 要： | 介绍14.00-24 28PR矿山型加深花纹工程机械轮胎的设计情况.结构设计:外直径 1 400 mm,断面宽 345 mm,行驶面宽度 335 mm,胎圈着合直径 610 mm,胎圈着合宽度 254 mm,断面水平轴位置(H1/H2) 0.883 5,花纹深度 45 mm,花纹周节数 30.施工设计:胎面采用四方五块结构,胎体和缓冲层帘布分别采用12层2100dtex/2V1锦纶66帘布和3层930dtex/2V3锦纶6帘布,胎圈采用三钢丝圈结构,采用半芯轮式Φ830 mm成型机头成型,立式硫化罐硫化.成品轮胎性能试验结果表明,轮胎充气外缘尺寸和物理性能达到设计和国家标准要求.
|
| 关 键 词： | 矿用轮胎 工程机械轮胎 结构设计 施工设计 |
Design of 14.00-24 28PR mine OTR tire with deeper pattern |
| |
| CHEN Wuqi and WEN Shenghui.Design of 14.00-24 28PR mine OTR tire with deeper pattern[J].Tire Industry,2009,29(7):404-406. |
| |
| Authors: | CHEN Wuqi and WEN Shenghui |
| |
| Affiliation: | Xinanjiang Factory;Hangzhou Zhongce Rubber Co.;Ltd;Jiande 311607;China |
| |
| Abstract: | The design of 14.00-24 28PR mine OTR tire with deeper pattern was described.In structure design,the following parameters were taken:overall diameter 1 400 mm,cross-sectional width 345 mm,width of running surface 335 mm,bead diameter at rim seat 610 mm,bead width at rim seat 254 mm,cross-sectional level ratio 0.883 5,pattern depth 45 mm,number of pattern pitch 30;in construction design,the following processes were taken:four-formula and five-piece extruded tread,12 layers 2100dtex/2V 1 nylon 66 cord for carc... |
| |
| Keywords: | mine tire OTR tire structure design construction design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
|
