|
|||||
|
|
| 论工艺因素对氧化铝陶瓷零件形位公差尺寸的影响 | |
| 引用本文： | 姚红艳,周文孝,秦成娟,栾艺娜,刘俊成.论工艺因素对氧化铝陶瓷零件形位公差尺寸的影响[J].硅酸盐通报,2007,26(4):770-777,833. |
| 作者姓名： | 姚红艳 周文孝 秦成娟 栾艺娜 刘俊成 |
| 作者单位： | 1. 山东省工业陶瓷研究院,淄博,255031 2. 山东省硅酸盐研究设计院,淄博,255086 3. 山东理工大学材料科学与工程学院,淄博,255010 |
| 摘 要： | 本文尝试运用材料学过程理论对陶瓷制造过程进行了分析,进而总结分析了影响95%氧化铝陶瓷零件形位公差尺寸的工艺因素,讨论了陶瓷制造过程的能量分配问题和统筹兼顾问题。 |
| 关 键 词： | 陶瓷零件 氧化铝 形位公差尺寸 |
| 文章编号： | 1001-1625（2007）04-0770-08 |
Effect of Process Control on Tolerance and Size of Al2O3 Ceramic Parts |
|
| YAO Hong-yan,ZHOU Wen-xiao,QIN Cheng-juan,LUAN Yi-na,LIU Jun-cheng.Effect of Process Control on Tolerance and Size of Al2O3 Ceramic Parts[J].Bulletin of the Chinese Ceramic Society,2007,26(4):770-777,833. | |
| Authors: | YAO Hong-yan ZHOU Wen-xiao QIN Cheng-juan LUAN Yi-na LIU Jun-cheng |
| Abstract: | The process of the ceramics'manufacturing was analyzed by the material's process control theory in this article,the effects of process control on tolerance and size of 95 Al_2O_3 ceramic parts were concluded,and the energy distribution and the all-round consideration in the manufacture of ceramics were discussed. |
| Keywords: | ceramic parts Al_2O_3 tolerance and size |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |