首页 | 本学科首页   官方微博 | 高级检索  
     

三氯化铁除砷的工艺研究
引用本文:叶恒朋,杜亚光,严立爽.三氯化铁除砷的工艺研究[J].化学与生物工程,2012,29(9):67-69.
作者姓名:叶恒朋  杜亚光  严立爽
作者单位:中南民族大学环境科学与工程研究所化学与材料科学学院,湖北武汉,430074
基金项目:国家自然科学基金资助项目,湖北省自然科学基金资助项目,湖北省创新群体项目,武汉市科技攻关重点项目
摘    要:为了减少铁盐除砷过程中产生的危险废渣的数量,研究了三氯化铁作为除砷剂处理砷(Ⅲ)和砷(Ⅴ)废水的工艺条件,主要包括pH值、铁砷摩尔比(nFe/As)、反应时间等.结果表明,用三氯化铁处理含砷(Ⅲ)1647.8 mg·L-1废水的最佳工艺条件为:pH=9、反应时间1h、nFe/As=2;处理含砷(Ⅴ) 3697.2 mg· L-1废水的最佳工艺条件为:pH=8、反应时间1h、nFe/As=2.此外,阳离子型絮凝剂PAM209cc适合于铁砷沉淀物的沉降,对砷(Ⅲ)废水和砷(Ⅴ)废水的最佳投加量分别为40 mL· L-1、20 mL· L-1.

关 键 词:  含砷废水  三氯化铁

Study on Process of Removing Arsenic with Ferric Chloride
YE Heng-peng , DU Ya-guang , YAN Li-shuang.Study on Process of Removing Arsenic with Ferric Chloride[J].Chemistry & Bioengineering,2012,29(9):67-69.
Authors:YE Heng-peng  DU Ya-guang  YAN Li-shuang
Affiliation:(Institute of Environment Science and Engineering,School of Chemistry and Material Science, South Central University for Nationalities,Wuhan 430074,China)
Abstract:The process of removing As(Ⅲ) and As(Ⅴ) with ferric chloride was studied in this paper.The optimal process for removing As(Ⅲ) and As(Ⅴ) were reacting for 1 h with the molar ratio of Fe to As of 2 under the pH value of 9,pH value of 8,respectively.In addition,cationic flocculant PAM 209cc was available for the sedimentation of ferric-arsenic precipitate,and its optimum addition amount for wastewater containing As(Ⅲ) and As(Ⅴ) was 40 mL·L-1 and 20 mL·L-1,respectively.
Keywords:arsenic  wastewater containing arsenic  ferric chloride
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号