首页 | 本学科首页   官方微博 | 高级检索  
     

注塑制品的翘曲优化设计进展
引用本文:高月华 王希诚. 注塑制品的翘曲优化设计进展[J]. 中国塑料, 2006, 20(11): 8-13
作者姓名:高月华 王希诚
作者单位:大连理工大学工业装备结构分析国家重点实验室,辽宁大连116024
基金项目:国家自然科学基金重大项目(10590354)
摘    要:分析了注射成型过程中各工艺参数对制品翘曲的影响,并通过对不同部件翘曲影响因素的分析总结出最重要的影响因素是保压压力,其次为模具温度和注射速度。优化工艺参数是减小翘曲变形的合理且可行的途径,但是由于注射成型过程的复杂性,翘曲优化模型不尽相同。根据优化目标函数的不同将优化模型分为间接优化和直接优化,并分别进行了详尽阐述。最后对为提高优化过程的计算效率,引入一些“替代函数”的翘曲优化进行了分析。

关 键 词:注射成型 翘曲变形 优化设计
文章编号:1001-9278(2006)11-0008-06
收稿时间:2006-08-29
修稿时间:2006-08-29

Development of Warpage Optimization Design for Injection-molding
GAO Yue-hua, WANG Xi-cheng. Development of Warpage Optimization Design for Injection-molding[J]. China Plastics, 2006, 20(11): 8-13
Authors:GAO Yue-hua   WANG Xi-cheng
Affiliation:State Key Laboratory of Structural Analysis for Industrial Equipment,Daian University of Technology, Dalian 116024, China
Abstract:The factors affecting the warpage deformations in the injection molding were discussed; injection speed, packing pressure, and mold temperature were considered as the key variables. Various direct and indirect optimization models were proposed to deal with the complexity of injection molding for reducing the warpage deformation. In order to improve computational efficiency of optimization, applications of some surrogates constituted a new trend. The future development in the molddesign was forecasted.
Keywords:injection molding   warpage   optimization design
本文献已被 CNKI 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号