Characterization and photocatalytic activity of transition-metal-supported surface bond-conjugated TiO2/SiO2

TM/TiO₂/SiO₂ photocatalysts were prepared by the photodeposition method using transition metal salts (TM=Fe³⁺, Co²⁺, Ni²⁺ and Cu²⁺) as precursors and the surface bond-conjugated TiO₂/SiO₂ as supporter in N₂ atmosphere, and were characterized by XRD, XPS, UV-Vis diffuse reflection and zeta-potential. Their photocatalytic activities were evaluated using reactive brilliant red K-2G (K-2G) and cationic blue X-GRL (CBX) showing different adsorption behavior on the oxides. Fe, Cu supported TiO₂/SiO₂ can efficiently extend the light absorption to the visible region. XPS analysis verified that the introduction of transition metal lead to the changes of the electronic environmental of Ti cations and the zeta-potential of oxides. As a result, K-2G has higher adsorption on the modified TiO₂/SiO₂ than that on the baked one, while the adsorption of CBX has a little change on the both oxides. At the same time, for the photodegradation of K-2G, Fe³⁺, Co²⁺, Ni²⁺-modified catalysts show that their photoactivities are 3.3–2.2 times higher than the bare one. On the contrast, all transition-metal-supported catalysts have no significant activity improvement except that Fe/TiO₂/SiO₂ shows 1.68 times higher activity for the photodegradation of CBX. The results indicate that the photoactivity could be increased in photodegradation of dyes by changing the performances of adsorption to dyes and absorption to light of photocatalyst.