An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Ultra-high molecular weight polyethylene (UHMWPE) is extensively used in frictional applications due to its advanced wear resistance. This advanced polymer is reinforced with hard particulate fillers for further developments against wear conditions. Since elevated temperatures prevail in the service conditions, wear behavior of UHMWPE composites is an important issue for the engineering applications. In the present work, UHMWPE-based composites including silicon carbide (SiC) fillers were fabricated in a compression molding chamber. In the specimen preparation stage, molding pressure, filler amount, and filler particle size were varied to investigate the influence of these variables. Upon deciding the optimum parameters from the wear tests conducted at room temperature, the wear experiments were repeated for the optimum specimen at elevated temperatures, such as 40 and 60°C. According to the results, the wear behavior of the SiC/UHMWPE composites is heavily changed by the effect of elevated temperature. Adhesive effect is pronounced at elevated temperatures while the wear characteristics possess the abrasive effect in the sliding path. In addition, the composites exhibit an accelerated material loss as temperature increases during the frictional system.