Hydrophobizing polyether sulfone membrane by sol-gel for water desalination using air gap membrane distillation |
| |
Authors: | Mohammad Ali Mousavi Mahsa Baghban Salehi |
| |
Affiliation: | Chemical Engineering and Petroleum Department, Chemistry and Chemical Engineering Research Center of Iran , Tehran, Iran |
| |
Abstract: | ABSTRACT The hydrophobic polyether sulfone membranes were prepared by the sol-gel method to be applied in an air gap membrane distillation setup for desalination. The surface modifications were carried out using Trimethylsilyl chloride (TMSCl) and Methyltrimethoxysilane (MTMS) solutions. The membranes were characterized using Attenuated Total Reflection Infrared (ATR-IR) spectroscopy, Scanning Electron Microscopy (SEM), and Optical Contact Angle (OCA) methods. The effects of membrane preparation as well as operating conditions such as temperature difference, salt concentration, feed rotation speed, and cold-side temperature on membrane performance were investigated using central composite design method. It was found that feed temperature has the largest effect among the parameters on the permeation flux. The flow rate and salt rejection of the membrane in the optimum conditions were 4.47 Kg m?2 h?1 and 99.37%, respectively. |
| |
Keywords: | Air gap membrane distillation experimental design hydrophobic polyether sulfone membrane sol-gel treatment |
|
|