首页 | 本学科首页   官方微博 | 高级检索  
     

非酸催化合成聚己二酸三甘醇酯
引用本文:李成成,蒋平平,董玉明,苗红艳.非酸催化合成聚己二酸三甘醇酯[J].塑料助剂,2011(5):30-33,38.
作者姓名:李成成  蒋平平  董玉明  苗红艳
作者单位:江南大学化学与材料工程学院,无锡,214122
基金项目:江苏省高校科研成果产业化推进工程项目(JH10-31); 江苏省产学研联合创新资金资助项目(BY2010118)
摘    要:以钛酸四正丁酯为催化剂,己二酸和二缩三乙二醇为反应原料,合成了聚己二酸三甘醇酯。实验结果表明,最佳的反应条件为:醇酸摩尔比1.20∶1.0,催化剂用量为醇酸总质量的0.5%,常压下反应温度200℃,反应时间4h,真空度-0.090MPa时反应温度210℃,反应时间3h,封端剂与己二酸的摩尔比0.08∶1.0,酯化率可达99.85%。产品聚己二酸三甘醇酯的数均相对分子质量(Mn)为6827,重均相对分子质量(Mw)为6593,相对分子质量分布指数为1.04,具有窄分布性。产品的粘度为3.23Pa·s(25℃),具有较好的流动性。

关 键 词:聚己二酸三甘醇酯  增塑剂  钛酸四正丁酯  合成  

Synthesis of Polytriethyleneglycol Adipate by Non-acid Catalysis
LI Chengcheng Jiang Pingping Dong Yuming Miao Hongyan.Synthesis of Polytriethyleneglycol Adipate by Non-acid Catalysis[J].Plastic Additives,2011(5):30-33,38.
Authors:LI Chengcheng Jiang Pingping Dong Yuming Miao Hongyan
Affiliation:LI Chengcheng Jiang Pingping Dong Yuming Miao Hongyan (School of Chemical and Material Engineering,Jiangnan University,Wuxi,214122)
Abstract:Poly triethyleneglycol adipate was prepared from adipate and triethyleneglycol, catalyzed by tetrabutyl titanate. The results of experiments showed the best reaction conditions of esterification were described as follows: molar ratio of triethyleneglycol to adipate 1.20:1.0, amount of catalyst 0.50% (based on the mass of acid and alcohol), reaction temperature under normal atmosphere 200 ℃, reaction time 4 h, reaction temperature under vacuum (-0.090 MPa) 210 ℃, reaction time 3 h, molar ratio of chain-end reagent to adipate 0.08:1.0. Esterification yield is greater than 99.85%. Number-average molecular weight (Mn) of polytriethyleneglyeol adipate is 6827 and the weight-average molecular weight (Mw) of it is 6593, the polydispersity index is 1.04, so molecular weight distribution of the product is narrow. The viscosity of product is 3.23 Pa-s under 25℃, having good liquidity.
Keywords:polytriethyleneglycol adipate  plasticizer  tetrabutyl titanate  synthesis  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号