首页 | 本学科首页   官方微博 | 高级检索  
     

MOE法炼铁工艺的可行性
引用本文:王一雍,李继东,金辉,王志英,李静,艾新港.MOE法炼铁工艺的可行性[J].鞍山钢铁学院学报,2011(1):4-7.
作者姓名:王一雍  李继东  金辉  王志英  李静  艾新港
作者单位:辽宁科技大学材料与冶金学院,辽宁鞍山114051
基金项目:国家自然科学基金资助项目(50874061).
摘    要:采用MOE法处理高炉冶炼用的铁精矿粉原料,对电解过程中的理论分解电压、吨铁所消耗的铁精矿粉量、CaO量及产生的渣量进行了分析。同时,对MOE法炼铁工艺及高炉炼铁工艺的能耗进行了分析。实验结果表明,MOE法在电解过程中阳极只有Fe3+铁离子的还原,因此可得到不含碳的纯铁。MOE法需要排渣及添加CaO过程,以维持其体系碱度在1.1左右。根据热力学方法计算出单纯的电解炼铁热耗标准煤为310.67 kg/t,远低于传统高炉炼铁部分能耗

关 键 词:MOE法  铁精矿粉  理论分解电压  能耗

Study on feasibility of ironmaking process with MOE method
WANG Yi-yong,LI Ji-dong,JIN Hui,WANG Zhi-ying,LI Jing,AI Xin-gang.Study on feasibility of ironmaking process with MOE method[J].Journal of Anshan Institute of Iron and Steel Technology,2011(1):4-7.
Authors:WANG Yi-yong  LI Ji-dong  JIN Hui  WANG Zhi-ying  LI Jing  AI Xin-gang
Affiliation:(School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China)
Abstract:MOE method is adopted to process the iron concentrate powder.The theoretical decomposition voltage,consumption of iron concentrate powder,and the quantity of CaO and iron slag are analyzed,the power consumption of ironmaking process with MOE method is compared with that of blast furnace ironmaking process.The results indicate that the anode only has the reduction of Fe3+ iron ion during the electrolysis process,therefore the pure iron with no carbon can not be obtained.MOE method needs the process of slag discharge and adding CaO to keep the system alkalinity at 1.1.According to the kinetics method,the consumption of pure electrolysis ironmaking is 310.67 kg/t standard coal,which is much lower than the power consumption of traditional blast furnace ironmaking process
Keywords:MOE method  iron concentrate powder  theoretical decomposition voltage  power consumption
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号