| 面向装配自动化的产品设计方法 |
| |
| 引用本文： | 倪俊芳,莫建中.面向装配自动化的产品设计方法[J].苏州大学学报(工科版),1999,19(2):05. |
| |
| 作者姓名： | 倪俊芳 莫建中 |
| |
| 作者单位： | 1. 苏州大学工学院,苏州,215021
2. 上海交通大学CIM中心,上海,210030 |
| |
| 摘 要： | 提高产品的装配效率有两种方法，一种是利用高效的装配设备，另一种是设计具有良好可装配性的产品，后者意义更大，为装配而设计（ＤＦＡ，ＤｅｓｉｇｎｆｏｒＡｓｓｅｍｂｌｙ）即是针对后者提出的。本文在ＤＦＡ基本准则的基础上研究了面向装配自动化方法的并行产品设计方法。
|
| 关 键 词： | 为装配而设计 装配自动化 并行设计 |
| 修稿时间： | 1998年7月2日 |
AUTOMATIC ASSEMBLY THROUGH CONCURRENT DESIGN |
| |
| Ni Junfang,Mo Jianzhong.AUTOMATIC ASSEMBLY THROUGH CONCURRENT DESIGN[J].Journal of Suzhou University(Engineering Science Edition),1999,19(2):05. |
| |
| Authors: | Ni Junfang Mo Jianzhong |
| |
| Affiliation: | Ni Junfang(Suzhou University 215021 )Mo Jianzhong(Shanghai Jiaotong University 200030) |
| |
| Abstract: | There are two basic ways to improve the efficiency of assembly,one is toconstruct perfect assembly facilities,the other is to design products to be assembled easily.The second method is more profitable. Design for Assembly(DFA) is a kind of concurrentproduct developing method used to guarantee the assembability of products. This paperintroduces the principles of DFA and its implementation within ConcurrentEngineering (CE). |
| |
| Keywords: | DFA assembly automation concurrent design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
