| 变分原理在模具设计中的应用 |
| |
| 引用本文： | 周德国 沈元林. 变分原理在模具设计中的应用[J]. 陕西科技大学学报, 1995, 13(1): 1-5 |
| |
| 作者姓名： | 周德国 沈元林 |
| |
| 摘 要： | 本文利用弹性力学的变分原理，对圆形孔凹模的强度计算进行研究，并导出不同边界条件下凹模厚度的计算公式。
|
| 关 键 词： | 变分原理，圆形凹模，强度计算 |
APPLICATION OF VARIATION PRINCIPLE TO THE DIE DESIGN |
| |
| Zhou Deguo, Shen Yuanlin. APPLICATION OF VARIATION PRINCIPLE TO THE DIE DESIGN[J]. Journal of Shaanxi University of Science & Technology(Natural Science Edition), 1995, 13(1): 1-5 |
| |
| Authors: | Zhou Deguo Shen Yuanlin |
| |
| Affiliation: | Zhou Deguo; Shen Yuanlin |
| |
| Abstract: | The strength calculation of circular dies has been studied by means of Variation Principle of elasticity mechanics. The formulas of dies thickness under different boundary conditions are alSo presented in this paper. |
| |
| Keywords: | Variation Principle circular dies the strength calculation |
| 本文献已被 CNKI 维普 等数据库收录！ |
