| 数控机床主轴电机伺服驱动系统研究 |
| |
| 引用本文： | 张亚菊,王秀莲,王玉湘,宋杨.数控机床主轴电机伺服驱动系统研究[J].沈阳理工大学学报,2013(5):64-67,77. |
| |
| 作者姓名： | 张亚菊 王秀莲 王玉湘 宋杨 |
| |
| 作者单位： | [1]沈阳理工大学信息科学与工程学院,辽宁沈阳110159 [2]沈阳航空职业技术学院,辽宁沈阳110034 |
| |
| 摘 要： | 针对CAK3665数控机床主轴电机，在分析数控机床主轴电机的工作原理、数学模型及控制策略的基础上，设计一套伺服控制系统。对控制系统进行仿真研究，结果表明，控制系统具有对故障的快速反应能力，并能完成控制要求，所设计系统具有可行性。
|
| 关 键 词： | 主轴电机 矢量控制 数控机床 仿真研究 |
Study on Main Shaft Control System of Numerical Control Machine |
| |
| ZHANG Yaju,WANG Xiulian,WANG Yuxiang,SONG Yang.Study on Main Shaft Control System of Numerical Control Machine[J].Transactions of Shenyang Ligong University,2013(5):64-67,77. |
| |
| Authors: | ZHANG Yaju WANG Xiulian WANG Yuxiang SONG Yang |
| |
| Affiliation: | 1. Shenyang Ligong University, Shenyang 110159,China;2. Shenyang Aviation Vocational Technical College, Shenyang 110034,China) |
| |
| Abstract: | For the CAK3665 main shaft control of numerical control machine, based on its working principle, mathematical model and control strategy, a servo control system is designed. After studying on this system by simulation method, it indicates that the system responses quickly to the failure and meets the requirement. Simulation results prove that the system can work well. |
| |
| Keywords: | main shaft motor vector control numerical control machine simulation |
| 本文献已被 维普 等数据库收录！ |
|
