| 基于Pro/E的弹箭三维参数化建模设计的研究 |
| |
| 引用本文： | 常微,郝博.基于Pro/E的弹箭三维参数化建模设计的研究[J].沈阳理工大学学报,2007,26(1):75-78,82. |
| |
| 作者姓名： | 常微 郝博 |
| |
| 作者单位： | 沈阳理工大学,机械工程学院,辽宁,沈阳,110168 |
| |
| 摘 要： | 利用Pro/E自带的Pro/Toolkit二次开发工具包和VC 6.0开发环境进行二次开发的方法,重点解决了基于约束关系的三维弹箭实体参数化设计和驱动机理.通过在应用程序界面修改主驱动参数及局部驱动参数,可以得到系列弹箭或新型弹箭,从而提高弹箭的设计效率.并以引信为例,阐述了基于VC 的Pro/E二次开发实现引信三维参数化建模设计的过程.
|
| 关 键 词： | 参数化驱动 二次开发 |
| 文章编号： | 1003-1251（2007）01-0075-04 |
| 修稿时间： | 2006-07-05 |
A Study on the Modeling Design of 3D Parameters of the Projectiles Based on Pro/E |
| |
| CHANG Wei,HAO Bo.A Study on the Modeling Design of 3D Parameters of the Projectiles Based on Pro/E[J].Transactions of Shenyang Ligong University,2007,26(1):75-78,82. |
| |
| Authors: | CHANG Wei HAO Bo |
| |
| Affiliation: | Shenyang Ligong University, Shenyang 110165, China |
| |
| Abstract: | In this paper,the entity parameters design and the drive mechanism of the 3D projectiles are described using Pro/Toolkit secondary development package of Pro/E and the development environment of VC 6.0.Through revising the main driven parameters and the some local driven parameters in the application's interface,a series or a new types of projectile can be obtained,thus,the design efficiency gets increased.Finally,taking fuse an example,the modeling design of the 3D parameters of fuse is introdused based on the secondary development of Pro/E of VC . |
| |
| Keywords: | Pro/Toolkit Pro/E VC 6 0 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
