| 镀膜参数对刀具切削性影响的研究 |
| |
| 引用本文： | 林茂用,许春耀.镀膜参数对刀具切削性影响的研究[J].重庆石油高等专科学校学报,2014(1):118-120. |
| |
| 作者姓名： | 林茂用 许春耀 |
| |
| 作者单位： | [1]福建信息职业技术学院机电工程系,福州350003 [2]龙华科技大学机械工程系,台湾桃园33306 |
| |
| 基金项目： | 福建省重点基金资助项目（2013H01010144）;福建信息学院自然科学基金项目资助（Y11110-Y13119） |
| |
| 摘 要： | 采用镀膜合金刀具加工AISI304不锈钢,应用灰关联-田口实验法设计混合直交表,研究镀膜工艺对刀具切削性的影响,得到镀膜最佳工艺参数：铬靶材功率100 W,钨靶材功率150 W,氩氮比例10％,制程时间9 min,实验显示工件表面粗糙度为0.75 μm,刀具磨损量28.3 μm.
|
| 关 键 词： | 镀膜 参数 刀具 切削性 |
Research on the Effects of Deposition Parameters on the Cutting Tool |
| |
| Authors: | LIN Maoyong XU Chunyao |
| |
| Affiliation: | 2 ( 1. Department of Mechanical and Electrical Engineering, Fujian Polytechnic of Information Technology, Fuzhou 350003 ; 2. Department of Mechanical Engineering, Longhua University of Science and Technology, Taoyuan Taiwan 33306) |
| |
| Abstract: | The AISI304 stainless steel is machined by coating alloy tools, an orthogonal array tables are designed by grey relation -Taguchi experiment method, the influence of process technology on cutting performance for the tool are researched. The best process parameters are obtained in the result, including the chromium target power 100 W, the tungsten target power 150 W, the argon and nitrogen ratio 10%, and the process time 9 min. The experi- ments shows workpiece surface roughness 0.75 μm, tool wear 28.3 μm. |
| |
| Keywords: | coating parameter cutting tool cutting performance |
| 本文献已被 维普 等数据库收录！ |
|
