首页 | 本学科首页   官方微博 | 高级检索  
     

基于RFID应用的小型化印刷偶极子天线设计
引用本文:李秀萍,刘禹,曹海鹰.基于RFID应用的小型化印刷偶极子天线设计[J].北京邮电大学学报,2006,29(5):75-78.
作者姓名:李秀萍  刘禹  曹海鹰
作者单位:1. 北京邮电大学,电信工程学院,北京,100876
2. 中国科学研究院,自动化研究所,北京,100080
基金项目:国家高技术研究发展计划(863计划),韩国Hutech21资助项目,澳门科技发展基金,江苏省重点实验室基金
摘    要:为了研究满足工程需要的RFID标签天线,以2.45 GHz工作频段为例,给出了印刷偶极子标签天线以及其小型化设计。所设计的2.45GHz印刷偶极子标签天线的性能指标为:在驻波比小于1.5时,工作带宽约为450MHz;天线增益为1.4dB;天线尺寸大小为37mm×45.8mm。小型化后的天线尺寸缩小为31.8mm×28.5mm,面积减小了约47%,在驻波比小于1.5时,天线带宽约220MHz,天线增益为1.2dB。此外,给出了小型化天线的实测结果,并且与理论结果进行了比较,结果吻合良好。

关 键 词:RFID标签天线  印刷偶极子天线  小型化
文章编号:1007-5321(2006)05-0075-04
收稿时间:2005-10-13
修稿时间:2005年10月13日

Minimized Printed Dipole Antenna Design Based on RFID Application
LI Xiu-ping,LIU Yu,CAO Hai-ying.Minimized Printed Dipole Antenna Design Based on RFID Application[J].Journal of Beijing University of Posts and Telecommunications,2006,29(5):75-78.
Authors:LI Xiu-ping  LIU Yu  CAO Hai-ying
Affiliation:1. School of Telecommunication Engineering, Beijing University of Posts and Telecommunications, Beijing 100876, China;
2. RFID Research Center, Institute of Automation, Chinese Academy of Sciences, Beijing 100080, China
Abstract:To meet the engineering requirement, a 2.45GHz RFID tag antenna and its minimization design are described. The antenna is presented with 450MHz bandwidth under the condition of VSWR less than 1.5, 1.4dB gain, and with the dimension of 37mm×45.8mm. After the minimization, the antenna shows a dimension of 31.8 mm×28.5mm, around 47% reduction of area compared to the original one. Its bandwidth is about 220MHz under the condition of VSWR less than 1.5, and 1.2dB gain. The measured results are compared with the simulated results, and good agreement is obtained.
Keywords:radio frequency identification tag antenna  printed dipole antenna  minimization
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《北京邮电大学学报》浏览原始摘要信息
点击此处可从《北京邮电大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号