| 基于数值模拟的筒形件正反拉深复合成形 |
| |
| 引用本文： | 于鸣,陆春林,乔广,金明华,宋玉泉,刘滨春.基于数值模拟的筒形件正反拉深复合成形[J].吉林大学学报(工学版),2009(Z2). |
| |
| 作者姓名： | 于鸣 陆春林 乔广 金明华 宋玉泉 刘滨春 |
| |
| 作者单位： | 吉林大学辊锻工艺研究所;长春富维-江森自控汽车饰件系统有限公司;吉林大学超塑性与塑性研究所;空军航空大学航空理论系; |
| |
| 基金项目： | “863”国家高技术研究发展计划项目(2006AA11A125) |
| |
| 摘 要： | 通过对筒形件正反拉深一次复合成形的有限元数值模拟,分析了主要工艺参数对筒形件正反拉深一次复合成形的影响。依据数值模拟设计了某一型号的机油滤清器壳体正反拉深复合成形模具并进行了工艺调试,既验证了数值模拟的可靠性又将正反拉深一次复合成形工艺用于了机油滤清器壳体的实际生产,获得了较为理想的效果。
|
| 关 键 词： | 材料合成与加工工艺 数值模拟 筒形件 正反拉深 复合成形 |
Complex drawing and reverse drawing forming of cylinder part basing on numerical simulation |
| |
| YU Ming,LU Chun-lin,QIAO Guang,JIN Ming-hua,SONG Yu-quan,LIU Bin-chun.Complex drawing and reverse drawing forming of cylinder part basing on numerical simulation[J].Journal of Jilin University:Eng and Technol Ed,2009(Z2). |
| |
| Authors: | YU Ming LU Chun-lin QIAO Guang JIN Ming-hua SONG Yu-quan LIU Bin-chun |
| |
| Affiliation: | 1.Roll Forming Institute;Jilin University;Changchun 130022;China;2.Technical Center Interior Group;Changchun Faway-Johson Controls Automotive Systems CO.LTD;Changchun 130033;3.Institute of Superplasticity and Plasitici;4.Aviation Theory Department of Air Force Aviation University;China |
| |
| Abstract: | By numerical simulation of complex drawing and reverse drawing in one procedure forming of cylinder part,this paper analyzed how main process parameters affected complex drawing and reverse drawing in one procedure forming of the cylinder part.then based on the results,a complex drawing and reverse drawing in one procedure mold for a kind of engine oil filter shell had been designed,and process experiments had been done.The process experiments achievement not only validated the reliability of the numerical ... |
| |
| Keywords: | materials synthesis and processing technology numerical simulation cylinder part drawing and reverse drawing complex forming |
| 本文献已被 CNKI 等数据库收录！ |
