300t精炼钢包透气砖应用的数学物理模拟 |
| |
引用本文: | 黄奥,;汪宁,;顾华志,;汪厚植,;李传维.300t精炼钢包透气砖应用的数学物理模拟[J].武汉冶金科技大学学报,2009(2):113-117. |
| |
作者姓名: | 黄奥 ;汪宁 ;顾华志 ;汪厚植 ;李传维 |
| |
作者单位: | [1]武汉科技大学耐火材料与高温陶瓷国家重点实验室培育基地,湖北武汉430081; [2]宝山钢铁股份有限公司,上海201900 |
| |
基金项目: | 湖北省教育厅重点科研资助项目(D20081109). |
| |
摘 要: | 针对300t精炼钢包,在LF设备电极位置与钢包透气砖所在位置的对应关系确定的基础上,通过水模、数模分别采用单吹、复吹时钢包内钢水流动特性和夹杂物去除的对比研究,探讨了透气砖结构性能的影响作用。结果表明,单吹时应使用抗渗透较好且能形成有利于夹杂物去除的气泡形态狭缝式透气砖(PBI),吹气卷渣临界气量为1.45m^3/h,气量需稳定,混匀时间为82.44s,钢液渗透小,夹杂物去除率为62.86%,能够满足搅拌钢液起到成分和温度的快速均匀以及净化钢液的作用。
|
关 键 词: | LF钢包 透气砖 物理模拟 数学模拟 |
Mathematical and physical m elling of slot plug application in 300 t ladle |
| |
Affiliation: | Huang Ao, Wang Ning, Gu Huazhi, Wang Houzhi, Li Chuanwei (1. The State Key Laboratory Breeding Base of Refractories and Ceramics, Wuhan University of Science and Technology, Wuhan 430081, China; 2. Baoshan Iron and Steel Co. , Ltd. , Shanghai 201900, China) |
| |
Abstract: | In light of the ladle furnace in Baoshan Iron and Steel Co. , Ltd. , this paper studies the fluid flow behavior and inclusions removal in argon blowing process with one or two plugs in the ladle furnace by means of water model and mathematical simulation. The slot plug construction and performance are optimized so that they provide the molten steel with suitable technological operation. The re suits show that ,PB 1 should be applied in gas blowing by one slot plug ; and when the gas flow rate remains 1.45 m^3/hsteadilyand the mixing time is 82.44 s, the inclusions removal rate reaches 62.86% and the ladle stirring and purification requirements can be satisfied. |
| |
Keywords: | LF ladle slot plug physical modelling mathematical simulation |
本文献已被 维普 等数据库收录! |
|