| 直/横流穿孔消声器压力损失的仿真分析 |
| |
| 引用本文： | 方建华,焦现炜,唐晓,王丽,焦培刚.直/横流穿孔消声器压力损失的仿真分析[J].武汉理工大学学报,2011(10):122-126. |
| |
| 作者姓名： | 方建华 焦现炜 唐晓 王丽 焦培刚 |
| |
| 作者单位： | 中国人民解放军72465部队;山东大学机械工程学院;山东交通学院工程机械系; |
| |
| 基金项目： | 山东省科技发展计划项目(2007GG3WZ04017); 济南市高校院所自主创新计划(201102027) |
| |
| 摘 要： | 利用CFD技术,对穿孔基本结构消声器进行建模,并在相同边界条件下,对消声器的空气动力性能进行了仿真分析,研究了穿孔孔径及穿孔率对直流/横流穿孔压力损失的影响规律。结合某挖掘机发动机特性设计了典型穿孔消声器,利用仿真和试验对消声器的性能进行了分析,并将仿真和试验结果进行对比,找出了二者产生较大误差的原因。该研究对于工程机械抗性消声器中有关穿孔结构的设计有一定的应用价值。
|
| 关 键 词： | 穿孔 消声器 压力损失 CFD |
Research on Simulating Analysis on Pressure Loss of Direct/Cross-flow Perforated Muffler |
| |
| FANG Jian-hua,JIAO Xian-wei,TANG Xiao,WANG Li ,JIAO Pei-gang.Research on Simulating Analysis on Pressure Loss of Direct/Cross-flow Perforated Muffler[J].Journal of Wuhan University of Technology,2011(10):122-126. |
| |
| Authors: | FANG Jian-hua JIAO Xian-wei TANG Xiao WANG Li JIAO Pei-gang |
| |
| Affiliation: | FANG Jian-hua1,JIAO Xian-wei1,TANG Xiao1,WANG Li 2,JIAO Pei-gang3 (1.The PLA 72465,Ji'nan 250022,China,2.School of Mechanical Engineering,Shandong University,Ji'nan 250061,3.Department of Construction Machinery,Shandong Jiaotong University,Ji'nan 250023,China) |
| |
| Abstract: | With CFD technique,typical basic perforated pipe muffler was modeled.Under the same boundary conditions,aerial dynamic performance was simulated and analyzed,and the law how perforation diameters and perforation rates influence on the pressure loss of direct/cross-flow perforated pipe mufflers was studied.A typical perforated pipe muffler was designed according to the engine characteristics of an excavator,and its performance was analyzed by simulation and experiment.Through comparing their results,the reas... |
| |
| Keywords: | perforated pipe muffler pressure loss CFD |
| 本文献已被 CNKI 等数据库收录！ |
|
