Structures and Electrochemical Performances of As-spun RE-Mg-Ni-Mn-based Alloys Applied to Ni-MH Battery

The La-Mg-Ni-Mn-based AB₂-type La_1-xCe_xMgNi_3.5Mn_0.5 (x = 0, 0.1, 0.2, 0.3, and 0.4) alloys were fabricated by melt spinning technology. The effects of Ce content on the structures and electrochemical hydrogen storage performances of the alloys were studied systematically. The XRD and SEM analyses proved that the experimental alloys consist of a major phase LaMgNi₄ and a secondary phase LaNi₅. The variation of Ce content causes an obvious change in the phase abundance of the alloys without changing the phase composition. Namely, with the increase of Ce content, the LaMgNi₄ phase augments and the LaNi₅ phase declines. The lattice constants and cell volumes of the alloys clearly shrink with increasing Ce content. Moreover, the Ce substitution for La results in the grains of the alloys clearly refined. The electrochemical tests showed that the substitution of Ce for La obviously improves the cycle stability of the as-spun alloys. The analyses on the capacity degradation mechanism demonstrate that the improvement can be attributed to the ameliorated anti-corrosion and anti-oxidation ability originating from substituting partial La with Ce. The as-spun alloys exhibit excellent activation capability, reaching the maximum discharge capacities just at the first cycling without any activation treatment. The substitution of Ce for La evidently improves the discharge potential characteristics of the as-spun alloys. The discharge capacity of the alloys first increases and then decreases with growing Ce content. Furthermore, a similar trend also exists in the electrochemical kinetics of the alloys, including the high rate discharge ability (HRD), hydrogen diffusion coefficient (D), limiting current density (I_L) and charge transfer rate.