| 考虑电压相位的实用负荷模型参数辨识 |
| |
| 引用本文： | 孙冉,刘利国,黄桦,陈谦,鞠平.考虑电压相位的实用负荷模型参数辨识[J].电力科学与技术学报,2012,27(2):10-15. |
| |
| 作者姓名： | 孙冉 刘利国 黄桦 陈谦 鞠平 |
| |
| 作者单位： | 1. 河南省电力公司调度通信中心,河南郑州,450052
2. 河海大学可再生能源发电技术教育部工程研究中心,江苏南京,210098 |
| |
| 基金项目： | 国家高技术研究发展计划("863"计划) |
| |
| 摘 要： | 目前电力系统感应电机负荷模型一般采用实用模型,参数辨识时仅采用电压有效值,而忽略电压相位和交轴电压分量.分析忽略交轴电压分量所需的条件,发现该条件通常难以满足.并提出考虑电压相位和交直轴电压分量的负荷建模实用模型,用于电力负荷参数辨识.不同故障下的算例结果表明,该实用模型比仅考虑电压有效值的实用模型,能更精确地辨识出负荷模型参数.
|
| 关 键 词： | 电力系统 负荷 参数辨识 实用模型 |
Parameters identification of practical load model with voltage phase considered |
| |
| SUN Ran
,
LIU Li-guo
,
HUANG Hua
,
CHEN Qian
,
JU Ping.Parameters identification of practical load model with voltage phase considered[J].JOurnal of Electric Power Science And Technology,2012,27(2):10-15. |
| |
| Authors: | SUN Ran LIU Li-guo HUANG Hua CHEN Qian JU Ping |
| |
| Affiliation: | 1. Dispatching and Communication Center, Electric Power of Henan Province, Zhengzhou 450052, China 2. Research Center for Renewable Energy Generation Engineering of Ministry of Education, Hohai University, Nanjing 210098, China) |
| |
| Abstract: | The load model of induction motor is usually described by a utility model, in which the voltage phase and q-axis voltage component are neglected due to measurement reasons. The conditions for neglecting the q-axis voltage component were analyzed in this paper, and the results showed that the conditions can＇t be satisfied in most cases. Then the model with both d-axis and q-axis voltage components considered were proposed to identify the road parameters. Simulation results showed that the proposed model can achieve more accurate parameter comparing to the models with the voltage phase and q-axis voltage component neglected. |
| |
| Keywords: | power systems electric load parameter identification utility model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
