| 高压快开盲板侍服密封圈非线性有限元分析 |
| |
| 引用本文： | 蔡永梅,王伟,谢禹钧,苗一,韦达刚.高压快开盲板侍服密封圈非线性有限元分析[J].辽宁石油化工大学学报,2007,27(3):35-37. |
| |
| 作者姓名： | 蔡永梅 王伟 谢禹钧 苗一 韦达刚 |
| |
| 作者单位： | 1. 辽宁石油化工大学机械工程学院,辽宁抚顺,113001
2. 中国石油抚顺石化设备检测监理研究中心,辽宁抚顺,113001 |
| |
| 摘 要： | 采用有限单元法对高压快开盲板中C形侍服密封圈进行了接触边界、大变形等非线性应力分析,应用有限元分析软件ANSYS建模,分析计算得出密封圈接触变形、接触应力及其分布情况,获得了密封圈与盲板筒体之间的接触压力分布规律及其与工作介质压力之间的关系,从而可以有效地分析C形复合结构侍服密封圈的密封能力。
|
| 关 键 词： | 有限元 密封圈 盲板 接触应力 |
| 文章编号： | 1672-6952（2007）03-0035-03 |
| 收稿时间： | 2006-10-09 |
| 修稿时间： | 2007-06-12 |
Nonlinear Finite Element Analysis of Servo Seal Ring in High-Pressure and Quickly Opening Blind Plate |
| |
| CAI Yong-mei,WANG wei,XIE Yu-jun,MIAO yi,WEI Da-gang.Nonlinear Finite Element Analysis of Servo Seal Ring in High-Pressure and Quickly Opening Blind Plate[J].Journal of Liaoning University of Petroleum & Chemical Technology,2007,27(3):35-37. |
| |
| Authors: | CAI Yong-mei WANG wei XIE Yu-jun MIAO yi WEI Da-gang |
| |
| Abstract: | Using finite element method,nonlinear stress,such as contact borderline and large deformation of C seal ring in high-pressure quickly opening blind plate,was analyzed.Through modeling and analyzing computing with ANSYS,contact deformation,contact stress and its distribution characteristics were obtained.And also,distribution law of contact pressure between seal ring and barrel of blind plate,and relationship between distribution and medium were gained.Furthermore,seal ability of C compound structure's servo seal ring was effectively analyzed. |
| |
| Keywords: | Finite element Seal ring Blind plate Contact stress |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
