| Study on geometric models of non-numerically controlled machining revolving cutter with constant pitch |
| |
| 作者姓名： | 韩成顺 尚元江 王景贺 唐余勇 董申 |
| |
| 作者单位： | [1]Dept.ofMechanicalEngineeringandAutomation.HarbinInstituteofTechnology,Harbin150001,China [2]Dept.ofMathematics.HarbinInstituteofTechnologyHarbin150001,China |
| |
| 基金项目： | SponsoredbytheNaturalScienceFoundationofHeilongjiangProvince (GrantNo .F0 1 -2 3)andtheMultidisciplineScientificResearchFoundationofHarbinIn stituteofTechnology(GrantNo.HIT .MD2 0 0 0 .1 7) . |
| |
| 摘 要： | This paper presents a new approach of designing the revolving cutter with constant pitch, and provides geometric models. The corresponding models in the non-numerically controlled manufacturing, such as designing the helical groove, grinding ,wheel, relative feeding motion, and calculating the helical angle of the cutting edge, are introduced. The examples are given In testifv that the design approach is simple and readily realized in machining the revolving cutter with constant pitch. The effective design and manufacture method provides general references for nonNC machining revolving cutter with constant pitch and reducing the equipments input.
|
| 关 键 词： | 旋转切割 非数控加工 几何模型 连续节距 |
Study on geometric models of non-numerically controlled machining revolving cutter with constant pitch |
| |
| HAN Cheng-shun,SHANG Yuan-jiang,WANG Jing-he,TANG Yu-yong,DONG Shen.Study on geometric models of non-numerically controlled machining revolving cutter with constant pitch[J].Journal of Harbin Institute of Technology,2004,11(4):356-360. |
| |
| Authors: | HAN Cheng-shun SHANG Yuan-jiang WANG Jing-he TANG Yu-yong DONG Shen |
| |
| Affiliation: | 1. Dept.of Mechanical Engineering and Automation,Harbin Institute of Technology,Harbin,150001,China
2. Dept.of Mathematics,Harbin Institute of Technology,Harbin,150001,China |
| |
| Abstract: | This paper presents a new approach of designing the revolving cutter with constant pitch, and provides geometric models. The corresponding models in the non-numerically controlled manufacturing, such as designing the helical groove, grinding wheel, relative feeding motion, and calculating the helical angle of the cutting edge, are introduced. The examples are given to testify that the design approach is simple and readily realized in machining the revolving cutter with constant pitch. The effective design and manufacture method provides general references for non-NC machining revolving cutter with constant pitch and reducing the equipments input. |
| |
| Keywords: | revolving cutter constant pitch non-numerically controlled machining geometric model |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
