首页 | 本学科首页   官方微博 | 高级检索  
     

短肢剪力墙节点推覆力模拟分析
引用本文:曾萤萤,杨晓华,蒋国维,李小岗.短肢剪力墙节点推覆力模拟分析[J].湖南工业大学学报,2018,32(1):22-28.
作者姓名:曾萤萤  杨晓华  蒋国维  李小岗
作者单位:湖南工业大学 土木工程学院,湖南工业大学 土木工程学院,湖南工业大学 土木工程学院,湖南工业大学 土木工程学院
摘    要:通过改变短肢剪力墙节点模型的轴压比,利用ANSYS软件对其节点做推覆力分析。通过5组(轴压比分别为:0.1,0.2,0.3,0.4,0.5)节点模拟实验,对比分析各轴压比下节点的耗能性能、刚度退化、裂缝的发展、极限承载力、极限承载力下对应的极限位移、延性等的变化规律。研究结果表明:反向加载时裂缝的发展速度远大于正向加载时裂缝的发展速度;连梁与墙肢交接处为其薄弱环节;轴压比在0.3左右时节点的耗能性质最优,极限承载力、极限位移最大,抗震性能最好。

关 键 词:短肢剪力墙  裂缝  轴压比
收稿时间:2017/4/21 0:00:00

Simulation Analysis of the Thrust Force of Short-Pier Shear Wall Joints
ZENG Yingying,YANG Xiaohu,JIANG Guowei and LI Xiaogang.Simulation Analysis of the Thrust Force of Short-Pier Shear Wall Joints[J].Journal of Hnnnan University of Technology,2018,32(1):22-28.
Authors:ZENG Yingying  YANG Xiaohu  JIANG Guowei and LI Xiaogang
Abstract:By changing the axial compression ratio of the model of short-pier shear wall joints, the ANSYS software has been used to analyze the thrust force of the joints. Based on the simulation experiment on 5 groups of nodes (with an axial compression ratio of 0.1, 0.2, 0.3, 0.4, 0.5 respectively) , a comparative analysis has been made of the change patterns of the energy consumption performance, stiffness degradation, crack development, ultimate bearing capacity, ultimate displacement and ductility of the joints under different axial compression ratios. The research shows that the development speed of cracks under reverse loading is far greater than that under forward loading; the shear wall joint is the weak link of the whole process; the optimal energy dissipation of nodes can be achieved with 0.3 being the axial compression ratio, where the ultimate bearing capacity and the ultimate displacement reach their maximums with the best seismic performance.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《湖南工业大学学报》浏览原始摘要信息
点击此处可从《湖南工业大学学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号