| 基于ZigBee的多路应力测量系统设计 |
| |
| 引用本文： | 王朋亮,丁金华,雷晓静,付青.基于ZigBee的多路应力测量系统设计[J].大连轻工业学院学报,2011(4). |
| |
| 作者姓名： | 王朋亮 丁金华 雷晓静 付青 |
| |
| 作者单位： | 大连工业大学机械工程与自动化学院; |
| |
| 摘 要： | 为了精确测得和有效管理力学实验室中各测量点的应力数据,提出了基于ZigBee与LabVIEW的多路应力测量系统。其ZigBee无线网络将实验室中各应力测量点测得的数据信号发送到中心节点,中心节点通过RS232串口与上位机通信,将数据传至上位机,形成集散式力学测量实验系统。ZigBee无线网络采用MC13214芯片。上位机监测软件采用LabVIEW虚拟仪器软件进行编写,对采集的数据进行实时分析、处理、显示。
|
| 关 键 词： | ZigBee LabVIEW 应力测量 单片机 |
Design of multi-stress measurement system based on ZigBee |
| |
| WANG Peng-liang,DING Jin-hua,LEI Xiao-jing,FU Qing School of Mechanical Engineering , Automation,Dalian Polytechnic University,Dalian ,China.Design of multi-stress measurement system based on ZigBee[J].Journal of Dalian Institute of Light Industry,2011(4). |
| |
| Authors: | WANG Peng-liang DING Jin-hua LEI Xiao-jing FU Qing School of Mechanical Engineering Automation Dalian Polytechnic University Dalian China |
| |
| Affiliation: | WANG Peng-liang,DING Jin-hua,LEI Xiao-jing,FU Qing School of Mechanical Engineering and Automation,Dalian Polytechnic University,Dalian 116034,China |
| |
| Abstract: | The stress data of measurement points in the mechanical laboratory should be measured accurately and management effectively.The author proposed multiple channels' stress measurement system based on ZigBee and LabVIEW.ZigBee wireless network nodes transmit the stress data of measurement points to the central node,then the central node communicates the data to the host computer by RS232 serial interface,which establishing a distributing center system of mechanical measurement experimental system.MC13214 chip ... |
| |
| Keywords: | ZigBee LabVIEW stress measurement MCU |
| 本文献已被 CNKI 等数据库收录！ |
|
