首页 | 本学科首页   官方微博 | 高级检索  
     

梳棉机盖板速度对梳理质量的影响
引用本文:郭昕,曹继鹏,许兰杰. 梳棉机盖板速度对梳理质量的影响[J]. 大连工业大学学报, 2014, 0(6): 448-451
作者姓名:郭昕  曹继鹏  许兰杰
作者单位:辽东学院服装与纺织分院;
基金项目:辽宁省高等学校重点学科资助项目(2012310)
摘    要:用USTER AFIS单纤维测试仪对DK903梳棉机在3档盖板速度条件下所加工的盖板花和生条进行了测试。结果显示,盖板速度为160mm/min时盖板花中纤维各项长度指标最短,所排出棉结和短绒也最多;盖板速度为240mm/min时盖板花杂质含量和未成熟纤维含量最多;盖板花中未成熟纤维质量分数在20%,说明盖板花中仍有一定比例的未成熟纤维。盖板速度为240mm/min时总体上最有利于梳理质量改善,生条质量也最好。

关 键 词:盖板速度  盖板花  生条  棉结  梳理质量

Effect of carding machine flats speed on carding quality
GUO Xin;CAO Jipeng;XU Lanjie. Effect of carding machine flats speed on carding quality[J]. Journal of Dalian Dalian Polytechnic University, 2014, 0(6): 448-451
Authors:GUO Xin  CAO Jipeng  XU Lanjie
Affiliation:GUO Xin;CAO Jipeng;XU Lanjie;Fashion and Textile College,Eastern Liaoning University;
Abstract:Flat strips and card slivers processed by DK903 carding machine were tested by USTER AFIS single fiber tester under three-grade flats speed.The results show that different fiber length parameters in flat strips are the shortest,and neps and short fibers discharged are the most when flats speed is 160mm/min,while impurity content and immature fiber content in flat strips are the most when flats speed is 240mm/min.Immature fiber content is about 20%,which indicating that there is a certain proportion of immature fibers in flat strips.It is the most conducive to improve carding quality when flats speed is 240mm/min,and card sliver quality is the best.
Keywords:flats speed  flat strips  card sliver  neps  carding quality
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号