首页 | 本学科首页   官方微博 | 高级检索  
     检索      

有色金属微量铣削中表面温度的影响因素
引用本文:孟宪春,杨杰,李世杰.有色金属微量铣削中表面温度的影响因素[J].大庆石油学院学报,2006,30(3):74-76.
作者姓名:孟宪春  杨杰  李世杰
作者单位:河北工业大学,天津,300130
摘    要:以金刚石铣刀精密铣削铝合金为研究对象,在VICTOR Vcenter-65加工中心上进行了精密铣削工件表面温度的测量.通过对测量数据处理分析,得到了铣削工件表面的温度经验模型.分析结果表明:在精密铣削中,工件表面的温度与背吃刀量、铣刀转速以及进给速度有关;背吃刀量对温度影响最大,铣刀转速次之,进给速度影响最小.

关 键 词:精密铣削  铝合金  工件表面温度  经验模型  影响因素
文章编号:1000-1891(2006)03-0074-03
收稿时间:02 22 2006 12:00AM
修稿时间:2006-02-22

Effect of micro-milling on the temperature of the machined surface
MENG Xian-chun,YANG Jie,LI Shi-jie.Effect of micro-milling on the temperature of the machined surface[J].Journal of Daqing Petroleum Institute,2006,30(3):74-76.
Authors:MENG Xian-chun  YANG Jie  LI Shi-jie
Abstract:Taking the fine milling aluminum alloy by the diamond milling cutter as the research object,the experiment of real-checking processed surface' temperature of fine milling has been carried out in the machining center of VICTOR Vcenter-65.By processing the experiment data,the experienced temperature model of processed surface after milling has already been set up.As the result,the temperature of processed surface in fine milling is closely associated with the milling depth,milling speed and advancing speed.The effect of milling depth is the biggest,next is milling speed,and the minimal is advancing speed.
Keywords:fine milling  aluminum  temperature of milling surface  experienced model  factors
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号