| ZK60镁合金棒材挤压过程有限元分析 |
| |
| 引用本文： | 席海霞,于彦东,周浩,苏堪祥,吕新宇,李彩霞.ZK60镁合金棒材挤压过程有限元分析[J].哈尔滨理工大学学报,2010,15(1):60-63. |
| |
| 作者姓名： | 席海霞 于彦东 周浩 苏堪祥 吕新宇 李彩霞 |
| |
| 作者单位： | 1. 哈尔滨理工大学,材料科学与工程学院,黑龙江,哈尔滨,150040
2. 东北轻合金责任有限公司,黑龙江,哈尔滨,150060 |
| |
| 基金项目： | 哈尔滨市科技攻关项目 |
| |
| 摘 要： | 采用刚粘塑性有限元理论,分别用2mm/s、3mm/s、4mm/s、5mm/s的挤压速度,对ZK60镁合金棒材的挤压过程进行了数值模拟,观察棒材挤压过程中金属流动情况,并分析了挤压变形时工件内部的温度变化情况,以及应力、应变分布规律.以模拟出的挤压件流出模孔时等效应力应变的分布规律,确定该棒材挤压的最佳工艺参数.
|
| 关 键 词： | 挤压 ZK60镁合金 棒材 有限元分析 |
Finite Element Analysis of Extrusion Forming of ZK60 Magnesium Alloy Bar |
| |
| XI Hai-xia,YU Yan-dong,ZHOU Hao,SU Kan-xiang,LU Xin-yu,LI Cai-xia.Finite Element Analysis of Extrusion Forming of ZK60 Magnesium Alloy Bar[J].Journal of Harbin University of Science and Technology,2010,15(1):60-63. |
| |
| Authors: | XI Hai-xia YU Yan-dong ZHOU Hao SU Kan-xiang LU Xin-yu LI Cai-xia |
| |
| Affiliation: | 1. School of Materials Science and Engineering, Harbin University of Science and Technology, Harbin 150040, China; 2. Northeast Light Alloy Company Limited, Harbin 150060, China) |
| |
| Abstract: | In this research we simulated ZK60 magnesium alloy bar in which the diameter is 45 mm with rigid viscoplastic finite element theol7. The extrusion velocity is respectively 2 mm/s ,3 mm/s ,4 mm/s ,5 mm/s in extrusion process. Then the process of metal flow in extrusion forming was observed and the variation of temperature ,the distribution of effective stress field and effective strain field in inner workpiece was obtained during the deformation course. At last we determined the best extrusion technical parameters of the bar through the distribution of effective stress and effective strain at the die bearing during the extrusion forming . |
| |
| Keywords: | extrusion ZK60 magnesium alloy bar finite element analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
