| 基于LS-DYNA的钢筋切断机剪切钢筋的动态仿真 |
| |
| 引用本文： | 刘中,朱振华,卫青珍.基于LS-DYNA的钢筋切断机剪切钢筋的动态仿真[J].太原重型机械学院学报,2011(1):33-36. |
| |
| 作者姓名： | 刘中 朱振华 卫青珍 |
| |
| 作者单位： | [1]太原科技大学,太原030024 [2]北方重工集团有限公司,沈阳110027 |
| |
| 摘 要： | 针对钢筋切断机剪切力的变化及钢筋断裂的过程,利用LS-DYNA对钢筋切断机剪切钢筋的动态过程进行仿真分析。介绍在LS-DYNA中建模、网格划分与加载的过程,以及显示后处理和结果的分析,得出剪切力的大小及其变化趋势,同时得到钢筋断裂的动态过程,通过观察钢筋剪切的断口及应力应变分布云图,分析剪切力的变化情况,得出部分动态特性,进一步验证钢筋切断机剪切钢筋的可靠性。为今后相关的动态研究与分析提供参考,同时也对钢筋切断机的设计生产具有一定的帮助。
|
| 关 键 词： | 钢筋切断机 LS-DYNA 动态分析 |
Dynamic Simulation on Shear Reinforcement Based on LS-DYNA for Reinforcing Steel Cutting Machine |
| |
| LIU Zhong,ZHU Zhen-hua,WEI Qing-zhen.Dynamic Simulation on Shear Reinforcement Based on LS-DYNA for Reinforcing Steel Cutting Machine[J].Journal of Taiyuan Heavy Machinery Institute,2011(1):33-36. |
| |
| Authors: | LIU Zhong ZHU Zhen-hua WEI Qing-zhen |
| |
| Affiliation: | 1.Taiyuan University of Science and Technology,Taiyuan 030024,China;2.North Heavy Industry Group Co.Ltd.,Shenyang 110027,China) |
| |
| Abstract: | For the changes of steel shear force in the process of reinforcement fracture,the dynamic process of shearing reinforced steel bar on reinforced steel cutting machine was simulated based on LS-DYNA.The modeling,meshing and loading process by LS-DYNA,as well as displaying the postprocessing results,are introduced.The shear force and its trends were got,and the dynamic process of reinforcement fracture was obtained.By observing the fracture,shear stress and strain contours,the change of shear force was analyzed and the partial dynamic characteristics was given,which further verified the reliability of the reinforce steel cutter.This article provides references for the related dynamic research and analysis in the future,which is also beneficial to design and production of reinforcing steel cutting machine. |
| |
| Keywords: | reinforcing steel cutter LS-DYNA dynamic analysis |
| 本文献已被 维普 等数据库收录！ |
|
