首页 | 本学科首页   官方微博 | 高级检索  
     

高频传感器在10kV电缆带电检测中的应用
引用本文:陶诗洋,冯义,曹佳楣,王秋鹏,石磊. 高频传感器在10kV电缆带电检测中的应用[J]. 中国电力, 2011, 44(3): 27-30
作者姓名:陶诗洋  冯义  曹佳楣  王秋鹏  石磊
作者单位:1. 华北电力大学,北京,102206;北京市电力公司,北京,100031
2. 北京市电力公司,北京,100031
摘    要:电缆安装和长期运行中可能产生各种缺陷导致局部放电。由于交联聚乙烯等挤塑型绝缘材料耐放电性较差,绝缘材料老化最终导致绝缘击穿,造成重大事故。电缆终端的故障率远高于电缆本体,通过试验研究了基于大尺径高频传感器的电缆终端检测方法。在实验室进行了传感器的研制和试验方法的校验,对运行中的电缆终端进行了局部放电普测,通过实例验证了此种方法的可行性,可为高压开关柜内电缆终端局部放电高频检测现场诊断提供参考。

关 键 词:大尺径  高频  电缆  终端  局部放电  传感器  检测

Application of high frequency sensor in PD detection for a live 10 kV cable terminal
TAO Shi-yang,FENG Yi,CAO Jia-mei,WANG Qiu-peng,SHI Lei. Application of high frequency sensor in PD detection for a live 10 kV cable terminal[J]. Electric Power, 2011, 44(3): 27-30
Authors:TAO Shi-yang  FENG Yi  CAO Jia-mei  WANG Qiu-peng  SHI Lei
Affiliation:TAO Shi-yang1,2,FENG Yi2,CAO Jia-mei2,WANG Qiu-peng2,SHI Lei2(1.North China Electric Power University,Beijing 102206,China,2.Beijing Electric Power Company,Beijing 100031,China)
Abstract:Possible defects introduced by installation and long time operation could lead to power cable partial discharge(PD).The insulating material produced by extruding such as XLPE is liable to PD.The aging of those materials could result in insulation breakdown and undesirable accidents.The failure rate of cable terminals is much higher than that of cable body.The PD detection method based on a high frequency current sensor with large diameter for cable terminals was studied.The sensor was developed and calibrat...
Keywords:large diameter  high frequency  cable  terminal  partial discharge  sensor  detection  
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号