10～35千伏不接地系统电容电流测试方法研究

随着配电网架结构的变化和电力电缆大量投入使用,10~35千伏不接地系统对地容性电流将随之增大,系统电容电流是否满足《交流电气装置的过电压保护和绝缘配合》(DL/T620-1997)的要求,则是对10~35千伏电网监测的工作重点。测得所辖变电站不接地系统电容电流的大小,对电容电流超标的变电所,逐步加装消弧线圈或接地变消弧线;掌握所辖变电站不接地系统电容电流的补偿情况;准确选择和合理配置消弧线圈或接地变消弧线圈自动跟踪补偿装置的容量提供依据。因此,对不接地系统容性电流在计算的基础上,测量运行中单相接地电容电流是十分必要的,同时,也能验证小电流接地选线装置的正确性。

A D iscussion on the Method for Testing the Capacitive Current of the 10~35 kV Ungrounded System

With the changes in the structure of the distribution network frame and a large amount of power cables being put into use in Xifeng urban area of Qingyang city,capacitive ground current of the 10 !35 kV ungrounded will increases.The most important thing in the monitoring of the 10 !35 kV grid is whether the system＆#39;s capacitive current can meet the requirement in over-voltage protection and insulation coordination of AC electrical installations （DL/T620 -1997 ）.It is necessary to measure the capacitive current of the ungrounded system of the substation,gradually add arc-suppression coils or grounded arc-suppression coils to those substations with excessive capacitive current,keep informed on the compensation of capacitive current of the ungrounded system of the substations under control,correctly select and reasonably provide arc-suppression coils or grounded suppression coils as a basis for automatic tracking of the capacity of the compensating device.Therefore,it is necessary to measure the single-phase grounded capacitive current in operation in addition to the calculation of ungrounded system capacitive current,and to verify the correctness of the line selecting device for small current grounding.