首页 | 本学科首页   官方微博 | 高级检索  
     检索      

660 MW机组HP碗式中速磨煤机状态检修的研究
引用本文:王超,陈刚,李冰,张聪,董超,张成,黄树红.660 MW机组HP碗式中速磨煤机状态检修的研究[J].电站系统工程,2006,22(4):27-29.
作者姓名:王超  陈刚  李冰  张聪  董超  张成  黄树红
作者单位:华中科技大学
摘    要:结合广东沙角C电厂的实际情况,指出了推行磨煤机状态检修相比于计划性大小修和故障后维修的优越性,针对660MW机组制粉系统的HP983碗式中速磨煤机提出了一套完整的开展状态检修的理论方案,同时制作了相应的磨煤机状态检修软件支持系统,对开展磨煤机的状态检修工作起到了良好的辅助作用,提高磨煤机的可靠性和可用率的同时,降低了磨煤机的维修费用。

关 键 词:磨煤机  状态检修  点检标准  数据挖掘  软件支持系统
文章编号:1005-006X(2006)04-0027-03
收稿时间:2006-01-11
修稿时间:2006-01-11

A Study of Condition-based Maintenance for HP Medium Speed Mills of 660MW Units
WANG Chao, CHEN Gang, LI Bing, et al.A Study of Condition-based Maintenance for HP Medium Speed Mills of 660MW Units[J].Power System Engineering,2006,22(4):27-29.
Authors:WANG Chao  CHEN Gang  LI Bing  
Abstract:According to the actual instance of Shajiao C Power Station in Guangdong province, implementing mill condition-based maintenance is better than break-down maintenance and time-based maintenance, aimed at HP983 medium speed mill of 660MW Unit milling system, a whole condition-based maintenance theoretical scheme is put forward, and mill condition-based maintenance software aided system is produced and shown, after condition-based maintenance, mill maintenance expense is reduced greatly ,and mill reliability and use efficiency is enhanced.
Keywords:mill  condition-based maintenance  sequenced detection standard  data analysis  software aided system
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号