首页 | 本学科首页   官方微博 | 高级检索  
     

基于PSCAD的双馈风力发电机的控制模式仿真研究
引用本文:蔡帜,刘建政,王健,刘树. 基于PSCAD的双馈风力发电机的控制模式仿真研究[J]. 电气技术, 2008, 0(5): 61-64
作者姓名:蔡帜  刘建政  王健  刘树
作者单位:清华大学电机系电力系统国家重点实验室,北京,100084;清华大学电机系电力系统国家重点实验室,北京,100084;清华大学电机系电力系统国家重点实验室,北京,100084;清华大学电机系电力系统国家重点实验室,北京,100084
摘    要:兆瓦级变速恒频风力双馈发电机通过采用定子磁场定向的转子励磁矢量控制策略可以实现跟踪利用最大风能。在分析了风力机的输出功率和发电机转速的关系特性之后,推导了随机风速下实现最大风能跟踪的目标参考值算法,由此得到三种控制模式:转速控制模式、转矩控制模式、功率控制模式,根据三种控制模式的控制性能的分析比较提出了功率控制模式是最优的控制策略。最后利用PSCAD软件建立了双馈风力发电系统的仿真模型,通过在阶跃风速下的仿真比较,结果验证了结论的正确性。

关 键 词:双馈风力电机  最大风能跟踪  转速控制模式  转矩控制模式  功率控制模式

Simulation Research on Control Modes of Doubly-Fed Wind Power Generator Based on PSCAD
CaiZhi,Liu Jianzheng,Wang Jian,Liu Shu. Simulation Research on Control Modes of Doubly-Fed Wind Power Generator Based on PSCAD[J]. Electrical Engineering, 2008, 0(5): 61-64
Authors:CaiZhi  Liu Jianzheng  Wang Jian  Liu Shu
Abstract:Doubly fed induction generator (DFIG) used in MW-class variable speed constant frequency wind energy generation system can capture wind energy with the highest efficiency by using the stator flux oriented vector control method. Based on the wind turbine characteristics,the arithmetic of the control objective reference values is derived. It is shown three control modes can be used to realize maximum power point tracking which are speed-mode control,torque-mode control and power-mode control. Based on The dynamic and static performances of three control modes analyzed and compared,it is proposed the best control mode is power-mode control. The model of MW-class wind generation system was established by PSCAD in order to simulate the operational performance with wind speed variation. The results show the correctness of the conclusion.
Keywords:doubly fed induction generator  maximal wind energy tracking  speed-mode control  torque-mode control  power-mode contro
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号