首页 | 本学科首页   官方微博 | 高级检索  
     

基于模糊贴近度的继电器产品概念设计新方法
引用本文:高朝晖,李志刚,王建楠.基于模糊贴近度的继电器产品概念设计新方法[J].继电器,2005,33(16):10-13.
作者姓名:高朝晖  李志刚  王建楠
作者单位:河北工业大学电器研究所 天津 300130
基金项目:河北省自然科学基金(602069) 天津市自然科学基金(023603111)
摘    要:基于模糊集模式识别理论中的“模糊贴近度”,提出了继电器产品在概念设计阶段进行结构设计的新方法。该方法首先时每种结构类型的产品建立标准模型,每个标准模型描述了相应类型的产品的典型信息; 在这里,标准模型的各个属性值均以模糊集合的形式表达。当用户提出的产品技术性能要求带有模糊性质时,则建立相应的模糊集合。然后,对于标准模型与用户的设计要求,针时同一属性计算两个模糊集合之间的贴近度,进而得到“设计要求”与每个标准模型关于全部属性的加权贴近度。最后根据“择近原则”,合理选择产品结构类型。该方法适宜应用在产品的智能设计系统中,可为产品的概念设计提供决策支持。

关 键 词:继电器    概念设计    标准模型    模糊集合    模糊识别    贴近度
文章编号:1003-4897(2005)16-0010-04
收稿时间:2004-11-20
修稿时间:2004年11月20

Conceptual design of relays based on the theory of fuzzy closeness degree
Gao ChaoHui;Li ZhiGang;Wang JianNan.Conceptual design of relays based on the theory of fuzzy closeness degree[J].Relay,2005,33(16):10-13.
Authors:Gao ChaoHui;Li ZhiGang;Wang JianNan
Abstract:Fuzzy closeness degree is a definition in theory of fuzzy set pattern identification. A standard model of each kind of structure of relay was built to describe its corresponding products typical information, whose attribute values were presented in terms of fuzzy sets. The closeness degree for every attribute between a standard model and an model established on users' demand was calculated to obtain the weighted closeness degree on an all-attribute basis between the two models. Thus proper product structure was chosen according to the principle of "higher closeness degree taken for the designed model". The technique discussed above provides decision support for type selection in product conceptual design in intelligent design system.
Keywords:relay  conceptual design  standard model  fuzzy set  fuzzy recognition  closeness degree
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《继电器》浏览原始摘要信息
点击此处可从《继电器》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号